bilmuche
November 29, 2009, 12:57 pm
[size=3]First, what I've learnt about HIR2 bulbs [/size]: [url="http://faqlight.carpassion.info/hl-filament-bulbs.htm"]Visit this Website[/url]
An HIR bulb differs from a standard Halogen bulb by the fact that they have a reflective infra red coating with primary purpose of reflecting heat back to the filament.
They are being markeded under these names:
9011 HIR1, high beam, 2500lm bright at 13,2 (+/-15%) Volts
9012 HIR2, low beam, 1875lm bright at 13,2 (+/-15%) Volts
[size=3]What I've seen on my iQ3 [/size](not sure it's the same on iQ1/2)
It's only one bulb. This bulb named HIR2 is a mono filament bulb. low & high beam obtained by move of reflector.
On the HIR2 bulbs is written : HIR2 & 9012. Same socket, same shape for these bulbs.
So, HIR2 seems to be absolutely similar (but better) than 9012 (like H1 100W & H1 55W).
Now, it seems to be impossible to find HID kit for HIR2 & 9012 socket.
9012 socket looks like 9006 (minor differencies, see pictures below : note that bulbs are positionned like for replacement)
9006 bulb can be fitted in place of 9012. Bulb is not too long. Socket is not exactly the same. But it's possible. Alignment is perfect for low/high beam.
I'll post a short tuto in french (too difficult in english for me). There is no particular difficulties. Just advices for positions of bulb and hole in the black plastic lid.
You can buy this 9006 55W kit (or an other) : [url="http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewItem&item=170409013045"]http://cgi.ebay.fr/ws/eBayISAPI.dll?ViewIt...em=170409013045[/url]
Good ebayer, fast delivery. Quality seems to be correct. Maybe, you can find better (i'll explain why in the tuto) or cheaper