Jump to content
Do Not Sell My Personal Information


Intake Manifold Removal


Zaakir
 Share

Recommended Posts

Hi,

Does anyone know how to remove the intake manifold on the 2zzge motor. I tried but failed. There seems to be something holding it down even though I removed all apparent bolts. I did not unbolt the throttle body as is seems to be independent of the intake manifold. I been running lean and suspect a gasket failure. Any info would be much appreciated. Thanks!

Regards

Zaakir

Link to comment
Share on other sites


There's a couple of places with hidden fasteners, if you look at the first pic you have to remove a nut (marked #2) and then remove two bolts (marked #1).

If you look at the second pic there's another single bolt at the bottom of the manifold you have to remove with a 14mm socket.

See Step 8 in this link http://www.newcelica.org/forums/showthread.php?t=290680

Hope this helps

Link to comment
Share on other sites

Yes it does, thank you:) I'll give it a try tomorrow hopefully if I get some time. Will let u know how it goes.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership