2015 Aygo Remote Locking - New Key

[pobrown]

Hi All,

Does anyone know how to reprogram a remote key to work with a 2015 Aygo. I'm wanting to have an extra remote key to go with the one that came with the car as I'm already fed up with using the spare non-remote key!

I've sourced a used identical key but I can't program it using the instructions I've found on this site. I'm guessing this could be because the Aygo is built in conjunction with Peugeot and Citroen so the Toyota instructions might not be valid.

Thanks

Phil

[pobrown]

No worries - found some other instructions which worked :-)

[Heidfirst]

In case anybody else finds themselves in the same situation perhaps it would be useful if you posted a link to those?

[pobrown]

Make sure the following conditions are met:

• The ignition switch is off.
• The driver door is open (all other doors closed)
• The driver door is unlocked.
• The driver door window is open.

Turn the ignition from off to on then off.

Close and open the drivers door twice (leave open at end).

Turn the ignition switch from off to on then off.

Close and open the drivers door twice, then CLOSE and LOCK the drivers door.

Turn the ignition swich from off to ON (leave ON for about 1 second) then back to off.

Unlock the drivers door.

At this point the doors should perform a single lock/unlock operation automatically to confirm that the system has entered ‘adding’ mode.

Press the lock and unlock switches on the new remote simultaneously for 1-1.5 seconds.
Then, within 3 seconds, press and hold either button for more than 1 second.

The doors should perform a single lock/unlock operation to confirm that the new remote has been added to the
system. If the lock/unlock operation happens twice (or not at all) then the learning has been unsuccessful.

There is a time-limit of approx. 40 seconds between each step.