Jump to content
Do Not Sell My Personal Information


Indicator Light Not Working


KimmiK
 Share

Recommended Posts

Hello!

I have a 2010 Aygo Black, only had the car 6 months and the green arrow for the right indicator stopped working today. It's my first car so I am clueless!

The actual indicator itself works, just the green arrow inside the car.

Link to comment
Share on other sites


Hi Kimberley & welcome to the forum :)

possibly just a bulb failure in the dash - not sure how easy it is to get to on an Aygo though..

Link to comment
Share on other sites

look at this link

http://www.toyotaownersclub.com/forums/topic/158568-led-dashheater-lights-fitted/

you could ask / pm him to see if the knows if the indicator lights are surface mount leds

as he said the leds he changed where a bugger to do.

Link to comment
Share on other sites

  • 3 years later...

Hello Kimmik, I know this is a complete shot in the dark but I also have a 2010 aygo and my right turn dash indicator worked for a while then stopped and now is trying to work but is really dim. Did you manage to sort yours out and if so can you give me any advice. Thanks John. 

Link to comment
Share on other sites

Try a very light thumping on the plastic part above the bulb. It might restore a loose connection. My old Corolla did that after 15 years of service and I was almost prepared to strip down the dash to get at the bulbs but light thumping restored the connection and no more problem.

Link to comment
Share on other sites


Thank you for the reply. I will try a light thumping with my 2lb lump hammer.... Haha seriously I must admit I've already tried a bit of knocking here and there. No joy. I've decided to take out the instrument cluster and trace the wiring as far as I can. I have a circuit tester and I'm learning how to use it. If all else fails buy a second hand cluster and hope for the best. Its a real headache. Thanks again.

Link to comment
Share on other sites

  • 10 months later...

Hi did you get this problem sorted ? I have same problem 

Link to comment
Share on other sites

  • 2 months later...
  • 11 months later...

had the same issue

cleaned the old indicator stalk - didnt work
put a new indicator stalk on - didnt work
https://www.youtube.com/watch?v=Cy7zk5ikaNo


sent off to Revtronic
https://www.revtronic.com/product/toyota-aygo-instrument-cluster-indicator-not-working/


hopefully working now

Link to comment
Share on other sites

  • 4 weeks later...

Did the repair by Revtronic work?

Link to comment
Share on other sites

On 3/1/2021 at 1:32 PM, Dodgysprocket said:

Did the repair by Revtronic work?

Yes 👍 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership