Jump to content
Do Not Sell My Personal Information


Require Help With Amp Power Wire


M3K
 Share

Recommended Posts

Hi pll, sorry i havent been on here for ages, university is doing my nut in...

Anywayz, ive had a new sub and amp for xmas and i can't figure out where the power cable should be going, ive tried the rubber bulkhead by the Battery but the cable gets stuck and wont go any further.

Also ive taken the glove box out and still no joy. :ffs:

plz help me on this one, i really need some good bass, its driving me crazy

Thanks

M3K

Link to comment
Share on other sites


push a penknife through the large round rubber grommet behind the Battery. dont cut the wires!! the grommet is double skinned so make sure you go through both sides. only a small cut about 15mm (horisontal cut) then take your yaris ariel tape the power wire along side it (taped on the end) then push the ariel through the cut and down towards the foot well. feel for it behind the dash and pull it down de-tape it and remove the ariel (without pulling the wire back through :D )

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership