New Product Front Under Brace!

[Envy Performance Ltd]

Another New product brought to you by Envy, Front Under Strengthening brace:-

Reinforces chassis to strengthen the body and reduce roll. The joined supports of the lower arm give the car body more rigidity. Less rocking on corners, so drivers can enjoy improved response and handling. Extremely light and hard, thanks to aluminum piping. The under brace is best used in conjuction with a upper strutbrace to tighten up the front end and further reduce flex. I have a few of these now in stock going for £55 + Delivery.

Thanks

Kevin

[RossP]

If it fits the 1.0l, i'll have one in about a week if that's ok?

[clarky]

Got one of these myself - dead easy to fit and tightens it all up nicely!

For 55 its a bargain ...

[Sim]

On the website kevin when I try and see just yaris products it dosen't come up with anything.

[earpl]

select yaris (your model) and select a product catagory. bam! there they are, get spending

[Yaris-Nut]

Is it as easy to install as it looks? Just undo the 2 bolts and put it on??

If it is then i may well be interested!

[clarky]

Yep - get it on a lift (I got the local tyre place to allow me). Dont move the car. Gently undo the bolts then rebolt it with the bar in place.

Job done - then chuck it around for a bit and check incase you need to retighten ...

[Sim]

Checking it out now. Thank you my funny little black man.

[Yaris-Nut]

Yep - get it on a lift (I got the local tyre place to allow me).  Dont move the car.  Gently undo the bolts then rebolt it with the bar in place.

Does it have to be done on one of those lifts? Cant it be done i your own garage with a jack and some front axle stands?

[knightrider]

group buy anyone?

ill take 1

1. Lee aka knightrider

[RossP]

group buy anyone?

ill take 1

1. Lee aka knightrider

←

I'll also have one if it fits 1.0l:

1. Lee aka knightrider

2. Ross aka paphosyarisfreak

[reece]

What’s the torque setting for the nuts when you re-tighten?

[Yaris-Nut]

I'll also have one if it fits 1.0l:

1. Lee aka knightrider

2. Ross aka paphosyarisfreak

←

Count me in if it fits a 1.3 SR.

1. Lee aka knightrider

2. Ross aka paphosyarisfreak

3. Phil aka Yaris-Nut

[Yaris WRC]

any pics of it on a t-sport?

i got an OMP one and it doesnt fit the t-sport the sump gets in the way.

[clarky]

YarsiNut - I guess you could do it without a lift - but much easier with with one.

WRC mate - it fits perfectly - it dips to one side ...

Lee - remind me and you can have a look at mine when I see you.

[Envy Performance Ltd]

OK Guys, if I can get 5 peeps interested in this I will do them for £45 each. I will need to establish some numbers pretty quickly though as I was going to place a order with the same factory for some other bits and bobs. Try and let me know B4 Monday morning if possible.

Thanks

Kevin

[RossP]

Come on, just two more! You know you want to people! :P

[admanirv]

OK Guys, if I can get 5 peeps interested in this I will do them for £45 each. I will need to establish some numbers pretty quickly though as I was going to place a order with the same factory for some other bits and bobs. Try and let me know B4  Monday morning if possible.

Thanks

Kevin

←

What exactly does this do, does it made the handling and steering better?

pondering if to get one

[RossP]

Reinforces chassis to strengthen the body and reduce roll. The joined supports of the lower arm give the car body more rigidity. Less rocking on corners, so drivers can enjoy improved response and handling. Extremely light and hard, thanks to aluminum piping

That just about sums it up!

[vitzpower]

Come on, just two more! You know you want to people!

I'll be in the Group Buy. Vitzpower - T-Sport

[RossP]

One more....!

1. Lee aka knightrider

2. Ross aka paphosyarisfreak

3. Phil aka Yaris-Nut

4. Vitzpower - T-Sport

[Envy Performance Ltd]

Well guys, I have had a look at the bar and I am pretty sure it will fit all Yaris engine sizes Phase1 or 2 but you may need to bore out the holes slightly depending on which model its going on. Drilling is very straight forward as its just aluminium which is pretty soft.

HTH

Kevin

[knightrider]

1. Lee aka knightrider

2. Ross aka paphosyarisfreak

3. Phil aka Yaris-Nut

4. Vitzpower - T-Sport

we need one more?

[alanbradley]

Oh go on then... Count me in ;)

Alan

[Envy Performance Ltd]

Well looks like its a goer, I will still hold off untill Monday Morning incase anyone else wishs to place an order over the weekend. Please add your name below if you wish to put your name down.

1. Lee aka knightrider

2. Ross aka paphosyarisfreak

3. Phil aka Yaris-Nut

4. Vitzpower - T-Sport

5. Alan Brady

6, kimi

Thanks

Kevin