Jump to content
Do Not Sell My Personal Information


4age To 4agze


juanmatejeda
 Share

Recommended Posts

i want to know what to do with the block to make a 4age engine and put a supercharger from a 4agze. please help. :ffs:

Link to comment
Share on other sites


Hi there and welcome, :thumbsup:

I think you might be better posting this in the 'Corolla' or 'MR2' part of the forum.

Also info I do know is the 'bear blocks' did have differences

Link to comment
Share on other sites

Would be easier and cheaper to get a complete 4A-GZE engine, clutch and gearbox and do a straight swap. You will also need the wiring loom and ECU for the GZE too.

Link to comment
Share on other sites

If you have a 7-rib 4A-GE block (with the 42mm big end/20mm gudgeon pin diameters) there's no difference between the blocks, bar the head to block oil drain and piston oil squirters on the later non-TVIS blocks.

The hardest part will be to choose between the 8.0 C/R pistons from the bigport 4A-GZE and the 8.9 C/R pistons from the smallport 4A-GZE. :)

Yves.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership