Jump to content
Do Not Sell My Personal Information


Fitting Head Unit In Yaris


famz
 Share

Recommended Posts

Hey Ppl!!

Im gna fit a Aftermarket Head Unit in my P1 Yaris, could sum1 plz tel me da parts i need, where to get them from and the part numbers plzzzzz well appreciated. i think i need:

ISO Cable-

Head Unit Facia-

nething els?

and ne1 gt ne gud ideas on Speakers? i think i need 6.5" for door Speakers bt dnt no whch brand n dnt wanna spend too much. ne ideas?

thanx alot :thumbsup:

Link to comment
Share on other sites


hey thanx alot m8, i tried searchin n cudnt find the thread u posted 4 sum reason. bit blind lol thanx alot

u no da facia is der like a toyota orderline i have to ring or do i pop into the toyota dealership or sumthing?

Link to comment
Share on other sites

The Toyota fascia can be ordered from any Toyota parts desk.

Just make sure it's the correct number for your Phase 1. ;)

Link to comment
Share on other sites

If you mean door Speakers, yes they are 6.5" with an autoleads adaptor which mounts them in.

There's loads of choice here... Kenwood, Pioneer, Alpine, Focal... all around £40-£70 and excellent quality units.

Link to comment
Share on other sites


Hmmm... Didn't see that avatar earlier.

I said P1, because Famz has said "P1 Yaris" in his/ her post.

Is yours a T2 1.0 Famz? If it is, and it's a french build, look for my post in the How-To section, as I found my T2 French built Yaris had a different fascia adapter to the others. I put the part number in there too. ;)

Link to comment
Share on other sites

yep gnome it is a 2003 1.0 t2 model, bt after seeing the thread on Which yaris i have p1 or p2 im pretty sure its a p1 (evn i wasnt sure b4) because:

i HAVE'NT got the Tear drop headlights and also one of the workshop guides the P1 dash looks exact same as mine so i gt a p1.

i rang the local toyota dealers and they said the facias will cost me £37.

lukin at ur avatar it seems u gt tear drop headlights m8.

Link to comment
Share on other sites

Yeah, mine's def a P2.

Just looks like you got teardrop headlights in ure avatar though.

Price sounds right for the fascia. Just make sure it's the right one now. They ordered it correctly for me on their 3rd attempt. First one was for a Jap P1, then the second time they ordered one for a Jap P2, and then finally got it right when they ordered it for a French built P2! :D

Link to comment
Share on other sites

Have you got any pics of the interior and exterior that are a bit bigger perhaps? to me it looks like a P1 in your avatar..

Oh and Earpl did a sticky thread which is at the top of the page in the Yaris forum..that may help?

Link to comment
Share on other sites

yeh i chekd dat thread dats wt made me sure its a p1 bt i gt a prob nw of nowin if my yaris is frnch or japanese as the facias r diff

Link to comment
Share on other sites

I was under the impression that all P1's were jap built, and only the later P2's were French built anyways?

On mine it's a simple as looking at a sticker in the top right (driver's side) of the front windshield. It'll say "Made in Japan/ France" on it. ;)

Otherwise, looking at the Chassis number will tell you too.

Link to comment
Share on other sites


Looking at your avatar it looks like you have got teardrops but I had a real good look there and its seems you haven't! Sorry for any confusion caused! :rolleyes:

But T2's were phase 2 models and not phase 1 models so I dunno! :wacko:

Link to comment
Share on other sites

no prbs ryan lukin at my avatar i did at first think i had teardrop lights, i had to go out n chek my car lol. bt its a p1........hopefully

Link to comment
Share on other sites

hw do i find out wt P1 my yaris is, if its a japan 1 or french?? ne ideas?

If it's a T2 like you say, then it's a Phase Two... no questions asked. In which case it's made in France.

It definatley looks like a P2 in your avatar... the lights have the more chrome effect to them and i don't see an aerial at the front.

Link to comment
Share on other sites

  • 3 weeks later...

:crybaby:

right!! here are some pics of my yaris could some one plzzzzzzz tel me whch phase my yaris is cos i dnt no whch phase facia i should order. thanx lol

personally i think its a P1 but peeps u can help!

As youl c i am currently havin to cope with a MP3 playa whch is not gud!!lol

th_0b8_000_0403.jpgth_bf6_000_0401.jpgth_305_000_0402.jpg

Link to comment
Share on other sites

What??

Phase 1 outside, Phase 2 inside!!

So you need a phase 1 adaptor!

Strange...Did other owner (cos i think you got it second hand) mention whether it had been in an accident or something similar?

Link to comment
Share on other sites

If it was in an accident, maybe it was repaired using P1 front end (if in a head-on collision)?

That's the same wheels, and interior as mine. Looks identical, bar the bumper/ lights, etc at the front.

Link to comment
Share on other sites

c wt i mean wen i sed CONFUSIN lol, yo Gnome if the interior is the same as yours i need P2 then? 4gt wt it looks like outside

Link to comment
Share on other sites

Yeh mate you defo need a phase 2 fascia. Sorry, i was having a moment of madness before!! Sorry for the confusion. But like Gnome said, it's been repaired with a phase 1 front end

Link to comment
Share on other sites

It's a P2 interior def, by the looks of things.

Lol - I can see why you were confused.

It does look good though - perhaps the best of both worlds. ;)

I found when ordering the faceplates for mine, the part was different to the codes given in the How To forum.

I added the codes for mine to the forum (as mine is a French-built P2).

I'll have a look for them for you. ;)

*Edit. Famz, here's the link I used. It has the part numbers in for phase 1 and two, and links to the fitting guides.

The last post on page 3 is one I posted, as I found out that my French P2 had yet a different fascia adapter!

You might have to get that one if yours is a French-built model.

THE LINK!!!!

HTH dude.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership