Jump to content
Do Not Sell My Personal Information


Envy Filter


Drewa.d
 Share

Recommended Posts

Ive just bought myself the last envy filter for my t sport. :D

Cheers

Drew

Edited by cfc1
Link to comment
Share on other sites


lol i know what your thinking that post was pointless, but there was something else on there which what it was mainly about, but its been edited.

Thanks anyway

Link to comment
Share on other sites

lol i know what your thinking that post was pointless, but there was something else on there which what it was mainly about, but its been edited.

Thanks anyway

You got any pics? How do you like it?

Link to comment
Share on other sites

hi, no just ordered it tonight, so i'll be getting it next week, as i have a few days off so i'll be in to take delivery, but im gonna have to wait to till friday till i get paid so i can become a bronze member

Link to comment
Share on other sites


Im sure i will, just need to save for some Coilovers now, then exhuast, and i'll be happy for a bit....

Link to comment
Share on other sites

just been reading some threads, is it necessary to reset your ecu when fitting a filter? when i fitted my apexi one i didnt and it seemed fine :blink:

Link to comment
Share on other sites

will do when it comes! cant wait i have an apexi at the mo, but i came into a bit of money so i thought i would treat myself :thumbsup:

Link to comment
Share on other sites

Nice one. If you can treat yourself to a set of Coileys you'd be having such more fun - just make sure you wind them ALL THE WAY DOWN!!!

Link to comment
Share on other sites

yeah defo!!! ive got 16's on and tein springs but it scrapes when plp are in the back, if i get coilovers will it scrape with plp in the back if i wind it down low? im not sure if it will as it will be a lot more stiffer wont it?

you have coilovers on yours?

Link to comment
Share on other sites

If you often carry a lot of people in the back DO NOT wind it all the way down becasue you will definately scrape!!

Mine is all the way down but rarely carry people in the back - when i do though it slow and carefull plus only allow two people in the rear and the ones that carry the lease weight!!

They are super tho - mine are the Envy coileys that are more like the Tein Super Street and not the Basic's there is a post a bit further down have a read before deciding

Link to comment
Share on other sites

i thought the envy ones were the tein street ones? :blink: and does your scrub if you have one person in the back?

Link to comment
Share on other sites

hi guys, anyone with an envy or typhoon kit, when you went to fit it, was the alarm attched to the body of the car just below the coolant bottle, on the little opening? if so will the pipe still go through? looks abit tight! :angry:

Thanks

Drew

Link to comment
Share on other sites


I think you need to move the alarm mate! :thumbsup:

Link to comment
Share on other sites

  • 2 weeks later...

My envy filter arrived today, but ive noticed that the alarm unit is bolted to the side of the car body where the silver pipe goes down, was anybodys the same when they went to install theres?

If so will it clear it? if not what do i do to move the unit and where? :help:

Cheers

Drew

Link to comment
Share on other sites

you move the unit, it doesn't matter where, as long as it's out of the way of the filter.

Link to comment
Share on other sites

Is there just 2 10mm bolts holding it on? and what about the wire going into the alarm unit? the loom wont be long enough to move it to the engine bay will it?

Link to comment
Share on other sites

Fitted my Envy filter tonight, must say it seems alot more responsive than my apexi, and it makes a nice roar to! :o

One or to things though does anybodys filter when its only idle shudder, like its struggiling for air now and then? ( that was before i had run it and settled it in, maybe just the AF meter adjusting?

Also is everyones filter right next the fog toughing it slightly? I didnt want to push it to far up the metal hose but had to a bit to get it to fit.

Great piece of kit though really impressed took it for a long run, checked it all over and the metal hose wasnt even hot! 8) still nice and cool.

Thanks Kevin for sorting me out!

Coming next coilovers..........

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership