Jump to content
Do Not Sell My Personal Information


Rattle In Dash


Fred6370
 Share

Recommended Posts

2nd part...

Spots which holds airbag ( never disconnect cable from airbag!! Remove it without disconnecting!!

dsc00112rm5.th.jpg

Just before returning dashboard back, check everything which can make noise just to be sure

dsc00114qx5.th.jpg

Few spots just to be sure that everything is on it's place

dsc00115dn6.th.jpg

On the left only one screw holds dashboard

Few spots where I add sponge

dsc00116ea2.th.jpg

Blue circle holds taho

dsc00117zi9.th.jpg

Everythin on it's place

dsc00118gr2.th.jpg

I hope that You will figure it out if I miss something to say, it's easy to do that all!!

If You do that you will not recognized Your car when you will go out for driveing.

P.S. Sorry maybe for my english, i try to explain on the best way rolleyes.gif

Regards, 042.gif

2nd part...

Spots which holds airbag ( never disconnect cable from airbag!! Remove it without disconnecting!!

dsc00112rm5.th.jpg

Just before returning dashboard back, check everything which can make noise just to be sure

dsc00114qx5.th.jpg

Few spots just to be sure that everything is on it's place

dsc00115dn6.th.jpg

On the left only one screw holds dashboard

Few spots where I add sponge

dsc00116ea2.th.jpg

Blue circle holds taho

dsc00117zi9.th.jpg

Everythin on it's place

dsc00118gr2.th.jpg

I hope that You will figure it out if I miss something to say, it's easy to do that all!!

If You do that you will not recognized Your car when you will go out for driveing.

P.S. Sorry maybe for my english, i try to explain on the best way rolleyes.gif

Regards, 042.gif

Hi drobotic,

Just found your very useful instruction with the pictures attached. As you have taken the dashboard off and put it back to its previous position, maybe you could remember the cup holder on the passenger side and what woulod be required on purpose to replace it, i.e. would it be required to take it out all the dashboard or it would be enough just to lift up the right side of the dashboard and get access to the cup holder.

Any thoughts would be very helpful.

Thanks

atex

Link to comment
Share on other sites

  • 4 years later...
On 2/26/2008 at 7:40 PM, drobotic said:

2nd part...

Spots which holds airbag ( never disconnect cable from airbag!! Remove it without disconnecting!!

dsc00112rm5.th.jpg

Just before returning dashboard back, check everything which can make noise just to be sure

dsc00114qx5.th.jpg

Few spots just to be sure that everything is on it's place

dsc00115dn6.th.jpg

On the left only one screw holds dashboard

Few spots where I add sponge

dsc00116ea2.th.jpg

Blue circle holds taho

dsc00117zi9.th.jpg

Everythin on it's place

dsc00118gr2.th.jpg

I hope that You will figure it out if I miss something to say, it's easy to do that all!!

If You do that you will not recognized Your car when you will go out for driveing.

P.S. Sorry maybe for my english, i try to explain on the best way :rolleyes:

Regards, 042.gif

Sir, please re-upload photos, links seems not valid

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership