Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

Changing The Seakers


famo
 Share

Recommended Posts

  • 2 months later...

O/S/F or N/S/F door panel. Either way pretty much the same, gently remove fuel release button on driver door or trim piece on passenger door. If you look up at slight angle you will see 10mm screw/bolt, remove this. Then behind inner door release handle you will find small screw to remove. You may have 1 screw behnd electric window switch pack, leave to last just in case. Door panel is fixed to door assembly with little plastic push-in buttons, if you do not have proper trim remover use large flat blade screwdriver to pop panel off. Do not use small screwdriver it will cut into & damage your door panel. You should now be able to lift panel upwards and away from the door, be careful with any electrical connections as you remove panel. Rear door pretty much the same process. Hope this is of help.

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...




Forums


News


Membership