Jump to content


Photo
- - - - -

Yaris Remote Key Help Please


  • Please log in to reply
22 replies to this topic

#1 nickp8

nickp8

    Advanced Club Member

  • Registered Member
  • PipPipPipPip
  • 164 posts
  • Toyota Model: 2002 Yaris 1.3 CDX

Posted 07 August 2008 - 11:47 AM

My Yaris 02 plate Yaris came with one 2 button remote key and one master key with no remote. I want to get a second remote key for the car.

If I buy a second hand 2 button remote key off ebay can I re-program it to my car myself?

I know if the second hand key's blades wont fit my car. The plan is to buy one of the new replacement cases with uncut blade sold on ebay, so the second hand key is just needed for the remote transponder to put in the new case.

On the back off my remote key it has a gold Toyota logo and it says:

CE0122
TOKAI RIKA CO LTD
MDL B01SA
M.t. S.H. Nr532/98
Serial No:
3.2V 3.0mA

Will the second hand key I get have to have the same information as above on the back or will any key do as long as it is a Yaris 2 button remote key?

Thanks.
Nickp.

Have something to contribute?

Sign in or register to start a topic...

Sign up to TOC Premium Membership To Remove These Ads

#2 nickp8

nickp8

    Advanced Club Member

  • Registered Member
  • PipPipPipPip
  • 164 posts
  • Toyota Model: 2002 Yaris 1.3 CDX

Posted 16 August 2008 - 05:08 PM

ttt

#3 wilx

wilx

    New Member

  • Registered Member
  • 1 posts
  • Toyota Model: 2001 SR

Posted 21 August 2008 - 03:01 PM

My Yaris 02 plate Yaris came with one 2 button remote key and one master key with no remote. I want to get a second remote key for the car.

If I buy a second hand 2 button remote key off ebay can I re-program it to my car myself?

I know if the second hand key's blades wont fit my car. The plan is to buy one of the new replacement cases with uncut blade sold on ebay, so the second hand key is just needed for the remote transponder to put in the new case.

On the back off my remote key it has a gold Toyota logo and it says:

CE0122
TOKAI RIKA CO LTD
MDL B01SA
M.t. S.H. Nr532/98
Serial No:
3.2V 3.0mA

Will the second hand key I get have to have the same information as above on the back or will any key do as long as it is a Yaris 2 button remote key?

Thanks.
Nickp.


I've seen this around, I now it sounds far fetched, ( ie , spin round , do a little dance etc). Try at own risk tho

Program Door Remote
--------------------------------
Drivers door open and removed from ignition
Insert key into ignition, then remove it
within 40 sec close and open drivers door twice
inset key in ignition then remove
within 40 sec close and open drivers door twice
close drivers door
Insert key into ignition
switch ignition ON and OFF once to program new key code whilst retaining original codes or twice to program a new key code whilst erasing the original codes
Remove key
System should now lock and unlock vehicle, once or twice depending which mode has been selected
Carry out the following within 20 sec
Yaris built in Japan and yaris verso: Simultaneously press and hold key lock and unlock buttons for 1-1.5 sec
Yaris built in France Press key lock button for a minimum of 1 sec and release
Within 3 seconds
Press key lock button for a minimum of 1 sec and release
System should now lock and unlock vehicle

NOTE :if system lacks and unlocks vehicle twice, programming procedure has not been completed .Repeat button procedure

NOTE: To exit programming mode, open the drivers door


Programming Immobilizer

Black Key
---------------
Obtain 1 Programmed black Key
Insert programmed black key into ignition
Within 15 sec, press and release accelerator pedal 5 times
within 20 Sec
Press and release brake pedal 6 times
remove black key.
Within 10 seconds, insert black key to be programmed into ignition
Within 10 sec, press and release accelerator once
Immobilizer warning lamp will flash
After 1 min immobilizer lamp will go off

If programming another key
Within 10 seconds, insert black key to be programmed into ignition
Within 10 sec, press and release accelerator once
Immobilizer warning lamp will flash

Max 7 black keys
To exit programming mode, remove ignition key and press brake pedal at lease once within 10 sec or wait 10 sec

Grey Key
--------------
Obtain 1 Programmed black Key
Insert programmed black key into ignition
Within 15 sec, press and release accelerator pedal 4 times
within 20 Sec
Press and release brake pedal 5 times
remove black key.
Within 10 seconds, insert grey key to be programmed into ignition
Within 10 sec, press and release accelerator once
Immobilizer warning lamp will flash for 1 min
After 1 min immobilizer lamp will go off

If programming another key
Within 10 seconds, insert grey key to be programmed into ignition
Within 10 sec, press and release accelerator once
Immobilizer warning lamp will flash for 1 min

Max 3 grey keys
To exit programming mode, remove ignition key and press brake pedal at lease once within 10 sec or wait 10 sec




Let me (and others) know if it works
think its for 99-06 versions but not sure

#4 nickp8

nickp8

    Advanced Club Member

  • Registered Member
  • PipPipPipPip
  • 164 posts
  • Toyota Model: 2002 Yaris 1.3 CDX

Posted 29 August 2008 - 10:00 AM

My local dealer wanted 230 for a new remote key including programming!

I contacted John @ Lindop Brothers (forum name: Parts-King) and he could supply a remote key ready cut at a very good price so I ordered one from him. It came today correctly cut for my car locks.

I then used the instructions posted above by wilx to program the remote fob and it worked first time! And then programmed the key for the immobiliser system. Thanks very much wilx. :)

:D Nickp.

-----------------------------------------------------------------------------------------------

Some additional info for anyone else looking to do this:

My orginal idea in using a second hand key would have actually worked so if anyone else wants to do it that way follow the below.

I couldnt find a second hand remote key the same as mine as the TOKAI RIKA CO ones seem to be rarer but if you have a more common one and can find a second hand key the same as yours you can do the below.

Buy a new empty remote keyfob case with uncut blade off ebay.
Get it cut at any local key cutting shop.
Buy a second hand remote key off ebay. It must be exact same model and part number as your exisitng one. The blade wont fit in your car but that doesnt matter, you only need it for the remote transponder.
Transfer the remote transponder from second hand key to the new empty remote keyfob case.
Use the instructions above to program the remote. As stated in the instructions you can erase the previous codes programmed in the transponder.

-------------------------------------------------------------------------------------

Just to make the instructions for programming key to immobiliser clearer as that took me a few goes:

Adding a key for the Immobiliser:

Using a black key you have that is already programmed to the immobiliser:

Insert already programmed black key into ignition switch
Within 15 seconds: Press and release accelerator pedal 5 times.
Within 20 seconds: Press and release brake pedal 6 times.
Remove black key.
Within 10 seconds: Insert the new black key to be programmed into ignition switch.
Within 10 seconds: Press and release accelerator pedal once.
Security warning lamp will flash.
After 1 minute security warning lamp will extinguish.

If programming another key:
Within 10 seconds: Insert black key to be programmed into ignition switch.
Press and release accelerator pedal once.
Security warning lamp will flash.
After 1 minute security warning lamp will extinguish.

TO EXIT PROGRAMMING MODE: REMOVE IGNITION KEY AND PRESS BRAKE PEDAL AT LEAST ONCE WITHIN 10 SECONDS, OR WAIT 10 SECONDS.

NOTE: A MAXIMUM OF 7 BLACK KEYS CAN BE PROGRAMMED.

#5 Parts-King

Parts-King

    AUTHORISED TOC TRADER

  • Authorised Trader
  • 10,163 posts
  • First Name:Kingo
  • Gender*:Male
  • Toyota Model: Auris 1.6 Valvematic Sport 5 Dr
  • Year: 2013
  • Location: Cheshire

Posted 29 August 2008 - 10:09 AM

nickp8: My local dealer wanted 230 for a new remote key including programming!


Think I will have to put my prices up :lol: Well done nickp8 ;)

Kingo :thumbsup:

#6 luv rav4

luv rav4

    New Member

  • Registered Member
  • 1 posts
  • Toyota Model: Rav 4

Posted 17 October 2008 - 04:08 PM

My local dealer wanted 230 for a new remote key including programming!

I contacted John @ Lindop Brothers (forum name: Parts-King) and he could supply a remote key ready cut at a very good price so I ordered one from him. It came today correctly cut for my car locks.

I then used the instructions posted above by wilx to program the remote fob and it worked first time! And then programmed the key for the immobiliser system. Thanks very much wilx. :)

:D Nickp.

-----------------------------------------------------------------------------------------------

Some additional info for anyone else looking to do this:

My orginal idea in using a second hand key would have actually worked so if anyone else wants to do it that way follow the below.

I couldnt find a second hand remote key the same as mine as the TOKAI RIKA CO ones seem to be rarer but if you have a more common one and can find a second hand key the same as yours you can do the below.

Buy a new empty remote keyfob case with uncut blade off ebay.
Get it cut at any local key cutting shop.
Buy a second hand remote key off ebay. It must be exact same model and part number as your exisitng one. The blade wont fit in your car but that doesnt matter, you only need it for the remote transponder.
Transfer the remote transponder from second hand key to the new empty remote keyfob case.
Use the instructions above to program the remote. As stated in the instructions you can erase the previous codes programmed in the transponder.

-------------------------------------------------------------------------------------

Just to make the instructions for programming key to immobiliser clearer as that took me a few goes:

Adding a key for the Immobiliser:

Using a black key you have that is already programmed to the immobiliser:

Insert already programmed black key into ignition switch
Within 15 seconds: Press and release accelerator pedal 5 times.
Within 20 seconds: Press and release brake pedal 6 times.
Remove black key.
Within 10 seconds: Insert the new black key to be programmed into ignition switch.
Within 10 seconds: Press and release accelerator pedal once.
Security warning lamp will flash.
After 1 minute security warning lamp will extinguish.

If programming another key:
Within 10 seconds: Insert black key to be programmed into ignition switch.
Press and release accelerator pedal once.
Security warning lamp will flash.
After 1 minute security warning lamp will extinguish.

TO EXIT PROGRAMMING MODE: REMOVE IGNITION KEY AND PRESS BRAKE PEDAL AT LEAST ONCE WITHIN 10 SECONDS, OR WAIT 10 SECONDS.

NOTE: A MAXIMUM OF 7 BLACK KEYS CAN BE PROGRAMMED.



I've tried this and it worked on my Rav 4 '03'! Save yourself 200-, which is what you'd have to pay at a main dealer. Buy a blank (I paid 7-) from ebay and a matching transponder (20-).
You would still need to program the keyless entry and I used this technique which I also found on the net.

1. Driver door open and unlocked. Key out of the ignition
2. Insert the key and remove 2 times in 5 sec.
3. Close and open driver door 2 times in 40 sec.
4. Insert the key and remove it again from ignition.
5. Close and open driver door 2 times in 40 sec.
6. Insert the key in ignition,
7. Close the door,
8. Turn to on and back to lock in 1 second intervals. 1 time for add, 2 times for rewrite, 3 for confirmation 5 for prohibition. (yes, there is no “4”)
9. Remove the key
10. Power lock will cycle to confirm
11. For add or rewrite mode within 40 sec of the confirmation,
A. press “lock” and “unlock” buttons of the FOB at the same time between 1 and 1.5 seconds.
B. within 3 sec press “Lock” button for more than 1 sec and release.
C. If it’s correct, the power door lock will cycle once. If it’s wrong the door lock will cycle twice.

Hope this helps and saves you the time it took me to troll through the rubbish and find the necessary procedures. :)

P.S. If you have no spare, get one quick, for although I have seen some techniques for reprogramming transponders without a master. I do not know if they work for sure. Either way I would strongly recommend you get a spare with transponder, as to replace a lost key without a master will oblige you to fork out for:
1. A new ECU
2. A new key with transponder and a spare.
3. Possibly new locks. Depends on whether you still have the key code.

#7 katrinajayne

katrinajayne

    New Member

  • Registered Member
  • 1 posts
  • Toyota Model: 2002 Colour Collection

Posted 03 December 2008 - 07:00 PM

nickp8: My local dealer wanted 230 for a new remote key including programming!


Think I will have to put my prices up :lol: Well done nickp8 ;)

Kingo :thumbsup:



Hey..I have just bought a 2002 Yaris and the metal part of the key is wobbly, im worried it'll come out (or worse get stuck in the egnition) Its being held with tape atm, but am looking to get a new key....how do I go about this....price, what I need etc

Get back to me as soon as please :)

Thanks


#8 DSPUK

DSPUK

    New Member

  • Registered Member
  • 7 posts
  • Toyota Model: Yaris 1.3SR

Posted 07 December 2008 - 04:44 PM

nickp8: My local dealer wanted 230 for a new remote key including programming!


Think I will have to put my prices up :lol: Well done nickp8 ;)

Kingo :thumbsup:



Hey..I have just bought a 2002 Yaris and the metal part of the key is wobbly, im worried it'll come out (or worse get stuck in the egnition) Its being held with tape atm, but am looking to get a new key....how do I go about this....price, what I need etc

Get back to me as soon as please :)

Thanks


The key on wifes 2000 Yaris came loose from fob - I had a new black key cut from a Auto key specialist for about 30 - he put transponder in from fob key and cut off the old key part of fob key - just use fob as a stand alone remote.
If you have the second key use that in ignition and use remote to lock and unlock till you get a new key.

dave

#9 lfc2001

lfc2001

    New Member

  • Registered Member
  • 1 posts
  • Toyota Model: toyota corolla verso

Posted 10 December 2008 - 05:03 PM

HI guys

New to this but hopefully someone canhelp me.

We have a 55 plate corolla verso. Suddenly a couple of weeks ago our remote key fobs stopped working. We took them to toyota and they reset them for us. they then stopped working again last week and we went again and the guy did some opening and closing the door a few times and managed to reset them. he said he couldnt give me the instructions to save me keep coming back.

does anyone know who to reset the fobs incase it happens again. I can't be bothered keep going downto toyota every 2 weeks.

Does this one for the yaris work for the verso to?

cheers
lfc2001

#10 phadge

phadge

    Club Member

  • Registered Member
  • PipPip
  • 26 posts
  • Toyota Model: Yaris T3

Posted 04 January 2009 - 01:53 PM

What is the easiest way (any by easiest I mean cheapest!) to get a remote key if all you have is 1 grey key for your yaris?

thanks!

Have something to contribute?

Sign in or register to start a topic...


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users