Jump to content
Do Not Sell My Personal Information


Fitting Anti Roll Bar Bushes


Coppertop
 Share

Recommended Posts

Just placed a write up on how with pics but it seems to have got lost mid air or maybe it was too big?

Problem was nocking from rear when going over manholes etc

Time taken about 30 mins

Skill level required I would say is Novice

tools Limited

Cost Cheap

So i wil try again and add info & Pics bit by bit

Link to comment
Share on other sites

Antiroll Bar To be cleaned

8Bartocleanup.jpg

Fitting New Bush

10FitNewBush.jpg

Cleaned & repainted Retainer

11FitRetainerBolts.jpg

Job Complete

12RefittingComplete.jpg

last shot location again look above light and you can see green anti roll bar retainer

CelicaARBush013.jpg

Link to comment
Share on other sites

Just got to grease and general clean up while I am down here

Cost of Parts £15.27 inc VAT from Toyota

Part Number T48818-20380

Link to comment
Share on other sites


and they still knock cos the anti roll bar itself wears away , and new bushes make little difference after a few days ;)

Link to comment
Share on other sites

First time i have heard of that .

I understood the rubber bush was to protect the metal and provide a absorbent wearing surface which reduced under the constant movement of the anti roll bar.

Obviously you must have had experience of this before on Celicas and i dont dispute your knowledge. Maybe you were unlucky and previous owners had not changed the bushes when they did need changing.

Either way the bushes were shot and are now fine, so i will monitor how long these will last. or the knocking to return.

cheers

Keith

Link to comment
Share on other sites

  • 1 year later...

Hi

I stumbled across this whilst searching for such a solution, I don't suppose you still have the pictures because I have to do this for my MOT and they would be really helpful.

Cheers

Andy

Link to comment
Share on other sites

SHARRU , ITS AN EASY JOB , 2 X 10 MM BOLTS TO REMOVE, BUSH PULLS OFF , PLACE NEW BUSH IN AND REPLACE METAL CUP AND 2 BOLTS .

Link to comment
Share on other sites

  • 5 years later...

I'm having the front & rear bushes done on my 1991 T170 Carina2. The guy in the garage couldn't fix a price point as his 'how long...' software doesn't show it..!! LoLzzz

We will no doubt settle on 30bob each.... :tongue:

I'm giving him the parts.

TS

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership