Reversing Sensors

[genterz]

Hi all,

I started fitting a set of reversing sensors off of e-bay today. All went well til it got too dark to connect the wiring up.

Does anyone know what colour the reversing light +ve feed is?

Or if not, does anyone have a wiring diagram they can send me a link to?

It's a 2006 XT4.

(I have tried searching previous threads but no one has mentioned what colour the wire is!) :)

Many thanks

[Catweazle]

Which parking sensors did you go for as I'm looking for some but the choice is bewildering?

Not sure if the wiring is the same in your 2006 as my 2005 but the positive feeds to the reversing lights are listed as follows in my Haynes manual:

Right Hand - Red/Yellow

Left Hand - Red/Blue

Double check before connecting up though!

[genterz]

Thanks!!

After 20 mins of looking for my multi meter, I discovered it was the red/blue wire (on the passenger side).

To be honest, most of the ones on e-bay are the same, just with additional bits like visual aids etc.

I went for a basic 4 sensor system which beeps and it works great. The colour match for our dark grey Rav was spot on! All for around £18.