Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

     

Injector Problem


elsee350
 Share

Recommended Posts

Got my car back this afternoon - it was finished yesterday but I was in work.

Seems to be back to normal, nothing untoward. From discussion with the mechanic it was the bolt on the injector clamp that had slacked back.

Thanks for the advice on the board. Much appreciated!!!

Link to comment
Share on other sites

Excellent...Thanks for letting us know the outcome.

Link to comment
Share on other sites

  • 3 years later...

Hi Damian,

I have got exactly mthe same problem that you are describing.

Did you manage to fix it please? What had to be done?

Peter

Link to comment
Share on other sites

7 hours ago, peter.ling24@gmail.com said:

Hi Damian,

I have got exactly mthe same problem that you are describing.

Did you manage to fix it please? What had to be done?

Peter

Hi Peter

Basically the injector is held in place by a v shaped clamp that is torqued down with a lock nut and held in place.

So the rocket cover needs to be removed along with all of the fuel lines, glow plug and cabling, to get access to the injectors.

Once in the the v shaped clamp should be replaced and torqued back into place, then the whole top end reassembled 

It's a good idea to check the other clamps when it's all opened up as well.

The engine oil that was leading out is used to cool the injectors. Once the injector is back in place the oil leak drops too. The rocket cover gasket should also be replaced.

Hope this helps.

D

Link to comment
Share on other sites

Hi Damian,

Thanks for replying. It is very helpful. I'll let you know how I get on.

Peter

Link to comment
Share on other sites


  • 2 years later...

hi as i used to own a 2012 toyota avensis 2,0 D-4D i replaced 8 injecters on it has 267.000 kms on the clock

Link to comment
Share on other sites

  • 7 months later...

Hi 

Problem with Injector #4 feedback volume 5.0 mm3/st changed injector, switched number 3 injector with number 4 , when switched no change in #4 feedback vol still 5.0

Any

Ideas

 

Link to comment
Share on other sites

  • 3 weeks later...

Hi,I have 07 aurus diesel 2litre ,when taking off in first,then second,car takes time in building up speed,acceleration delayed but after a few seconds speed is met,black smoke from exhaust, had services, nothing came up on diagnostic,all filters changed,oil,ect thought of map sensor or lambard sensor,but Sony know enough, can anyone advise please

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...




Forums


News


Membership