Jump to content
Do Not Sell My Personal Information


Engine Swap


commanderpuppy
 Share

Recommended Posts

Does any one know if there are any other engines that will fit the 92 Paseo.I have a tourch & welder to do the job.And i'm not afraid to do what it takes. :eek:

Link to comment
Share on other sites

GO HERE and read along as I take thise2.jpg

and shoe-horn it into

Corsa-front.jpg

after I make clearance for the transmission, kinda like doing this

clearance.jpg

You still willing? I'm on the transmission conversion now. :thumbsup:

Link to comment
Share on other sites

I like it. How much trouble with wireing ?Is any of the harness the same? Or should i try to find a whole car for the harness & computer.& of course the engine.Will the transmission bolt up or do you need a trans ? :thumbsup:

Link to comment
Share on other sites

Needs custom everything. Nothing fits at all. The wiring came out the MR2 basically as a unit without disconnecting from engine so I expect to just drill a hole in an area reasonable to relocate the ecu. I'll be using the MR2 transmission so I must relocate the shifter linkage. I plan to disassemble the CV axles and shorten the shafts myself. Front spindles have to be replaced with celica parts and that's not a simple bolt in either. Then the fronts become 5 lug and the strut mounts change...

Link to comment
Share on other sites


good luck mate.. there are alot more simple ocnversions like the

4efte turbo or the 5efhe... which is just a piece of ***** to fit rather than fabricatiing new bits. :ph34r:

Link to comment
Share on other sites

While this is true, the 4efte will be under loads of pressure to make 300hp, the 3sgte is barely modded. I see less problems from this setup once done.

Link to comment
Share on other sites

While this is true, the 4efte will be under loads of pressure to make 300hp, the 3sgte is barely modded. I see less problems from this setup once done.

hmmmmm

3sgte in a paseo - :drool::drool::drool:

checks bank account - noooooooooooooooooooooo :crybaby::crybaby:

J

Link to comment
Share on other sites

While this is true, the 4efte will be under loads of pressure to make 300hp, the 3sgte is barely modded. I see less problems from this setup once done.

hmmmmm

3sgte in a paseo - :drool::drool::drool:

checks bank account - noooooooooooooooooooooo :crybaby::crybaby:

J

isnt that 2.0L? Doubt it will fit :S ud be lucky to get a 1.8L In a cynos

Link to comment
Share on other sites

isnt that 2.0L? Doubt it will fit :S ud be lucky to get a 1.8L In a cynos

'fit' is a loose term, notice the required frame mod for 'fit' :wacko:

Link to comment
Share on other sites

isnt that 2.0L? Doubt it will fit :S ud be lucky to get a 1.8L In a cynos

'fit' is a loose term, notice the required frame mod for 'fit' :wacko:

sorry i guess you guys mean FORCE in :) not FIT in :)

Link to comment
Share on other sites

sorry guys off topic. COz, i jus noticed on ur sig that you have a 1.8T pushing only 115hp... how can this be make, i thought most N/A 1.8s would prduce that sort of power, yours is blown too...? just wondering...

oh and no idea bout the original q

Link to comment
Share on other sites

300 bhp in a FWD you'll want some good tyres then and a very good diff 5ETFE's in jap are runiing 350 ps all day long with no problems.

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership