Jump to content
Do Not Sell My Personal Information


My G6 Corolla 4X4 - My Rwd 7age corolla - Page 12


sonur
 Share

Recommended Posts

That's good news on the 4wd system :)

It will be interesting to see what the Camry turns out like :)

Big power ?

Thanks Paul.

This is the stock specs of my 2.0 3sfe engine

3S-FE 87-90 Bore 86.0 mm Stroke 86.0 mm 9.8:1 1,998 cc 90 kW (122 PS; 121 bhp) at 5,600 rpm

169 N·m (125 lb·ft) at 4,400 rpm

And this is the same age Turbo version of the engine but with two camgears

driving the timingbelt, bone stock stuff

3S-GTE 86-89 Bore 86.0 mm Stroke 86.0 mm 8.5:1 1,998 cc 185 PS (136 kW; 182 bhp) at 6,000 rpm 250 N·m (184 lb·ft) at 3,600 rpm Celica GT-Four (ST165)

Im going to try making it close to 200hp. Stock 3sfe are known to do up to 230hp bone stock

and even driven 200miles, im going to be using my Garrett watercooled Turbine from a 4200cc landcruizer

frontmount intercooler medium sized, FMU 12:1, home made 3" exhaust, and I might do some other little bids

that Im going to keep for myself at this moment, first thing first is to bolt the turbokit on befor I talk to

much and sell the damn thing :D

Picture of the Garrett Turbine

531608_10150947433497717_601474575_n.jpg

Its huge!!

535029_10150947433732717_52643701_n.jpg

I bought it from someone who made it to a 4g63t Mitsubishi eclipse and he blew the engine with it hehe

561244_10150947433347717_1994949778_n.jpg

Im trying to find time to do this to the camry, I want to make it run the first day,

as it is now bone stock im having a blast drifting every roundabout I go into :chinese:

I will try take a tonn of pictures when I do this, hope I do it soon

Enjoy

Link to comment
Share on other sites


Thanks guys :D

I have to pass smog in the end of this month (Oktober) and the exhaust just started leaking in two places

so now would be a good time to do the Turbo swap seeing that I need a new exhaust anyway..

<_<

Then I found out last night that a frontbumper from a Liftback GTi 1987-89 and Touring AE95 fits on the camry

and I have one with 6cm low front lip, seeing that the camrys front bumper or the lip is rusted to hell I also have

sideskirt from the GTi that fits almoast have to cut them where it meets the rear passenger doors.

so it seams to me im pretty lucky these days, hope theres no bad carma waiting for me by the next corner hehehe

Enjoy buds

Link to comment
Share on other sites


Luck does that sometimes, enjoy it :D

I will :D

Now lets party!!

Stock stuff befor I start pulling everything away for turbo

576366_10151087374507717_810410926_n.jpg

The 3sgte MR2 stock castiron turbo hedders with the Garrett 4200cc Landcruizer Turbine

306559_10151087374592717_1365365239_n.jpg

Fits marvelous

183561_10151087374687717_138739145_n.jpg

The exhaust part of the turbine looks awesome but the middle and intake section needs to lign better

155241_10151087374792717_91989695_n.jpg

So I pulled it apart

541100_10151087374887717_1093839023_n.jpg

Need to turn that key ring almoast 180°deg

534172_10151087375017717_1590905653_n.jpg

Exhaust powder, needs some cleaning befor I bolt it all togeather again

261955_10151087375122717_1772876818_n.jpg

225823_10151087375222717_116877434_n.jpg

The doner for the Tercel, so sad but It was to rusty

430487_10151087375282717_1751510003_n.jpg

199542_10151087375342717_461104419_n.jpg

Then we threw it away :D

60690_10151087379172717_353524180_n.jpg

And in it goes

560730_10151087379277717_1515529129_n.jpg

My mini me standing next to 38" tire that I bought for my dad and his jeep

68698_10151087381817717_1778104325_n.jpg

My Gremslins enjoying the balkoney ;)

523308_10151087381252717_2039105621_n.jpg

I think next up is to find new or used frontmount intercooler and pipes but If I cant find them I have a topmount that I can use.

Enjoy guys

Link to comment
Share on other sites

Im clearly going all they way with this stuff :euro:

I found a FMIC, funny thing when I was looking at it I realiced it was my old Intercooler that

I bought from eBay for some turbo project that I never finished and sold it :D

483101_10151091564282717_705416664_n.jpg

522301_10151091564222717_356197480_n.jpg

I also got intercooler pipes with it, just the silicone hoses are really exspensive and I got both for cheap

528757_10151091564337717_2052685246_n.jpg

Then I had to buy some rims for the G6 16" 8" with going to look nice

564802_10151091568922717_1146571174_n.jpg

Ran into this one outside a shipping company where I just sold some Corolla front seats, I want those Sport Max rims!!!

577399_10151091564127717_1769941929_n.jpg

Then I rented a dolly (what do you call it?) and finally went to pick up my 4Runner winter toy

578502_10151091567027717_1637390194_n.jpg

Its been standing there for 2years and another 5years befor that, but Its got alot of new stuff in it

580926_10151091567092717_123806145_n.jpg

Towed it with my dads jeep Izusu Trooper running 38" tires

292792_10151091567132717_1648199983_n.jpg

All the rust was taken and everything painted 4years ago, probably with a brush

523083_10151091567257717_1970150592_n.jpg

RED interrior :fox:

550433_10151091567312717_759512802_n.jpg

Home sweet home

47150_10151091567372717_1299322133_n.jpg

Not shore when I can do anything in the 4runner time will tell hopefully finished befor the first snow

You enjoy guys :flowers:

Link to comment
Share on other sites

Enjoyed the updates... :-)

More projects lol

Yea, im begining to think Im drinking something that makes me want to buy every Toyota

I see or maybe this is just me doing what I love, it makes me happy I woulden be doing this

if it woulden make me feel good :doctor: and also Im not working with school so this buying

and selling business is what pays my bills wich actually are almost none muhahaha :clap:

Over to the offroader

Ive been keeping these rims for ages, they originally came from my old Hilux that I owned 6years ago

547019_10151094663242717_338472838_n.jpg

I had the 31" tires that came from the Jeep comanche pickup installed on´em

598882_10151094663372717_1862768539_n.jpg

Its actually really good looking and theres almoast no rust!!

250588_10151094664837717_1434686773_n.jpg

There was some ignition wire that melted thats why its like this, the new wire came with the car

545859_10151094664507717_874116556_n.jpg

Now just to find time to bolt everything together

246594_10151094664652717_1607217875_n.jpg

The RED interrior, dont know why I love these old school colours

421307_10151094663982717_347606166_n.jpg

Has an roll cage from factory

284096_10151094664117717_393910622_n.jpg

And this is the awesome 5 point offroad home made suspension with air shocks or what you call it

199874_10151094663662717_2095515570_n.jpg

This probably cost the guy fortune to buy and built into the 4Runner, just the air shocks alone cost more then I paid for the car, lucky me or am I?? maybe theres something terribly wrong with the car :g:

420508_10151094663822717_40885035_n.jpg

Up next will be some more turbo related stuff, Im trying to fit the turbine with the intercooler input in the camry

Enjoy :nerd:

Link to comment
Share on other sites

Wow that's a great find :)

I look forward to some updates on that one :)

I was offered a second Toyota today, lets say I am thinking about it lol

Link to comment
Share on other sites

  • 1 month later...

The other day I sold 1tonn of Toyota spare part to Africa :D so now I have romm in the garage

I finaly got my face out to do something in the G6

Got it inside

30948_10151137111767717_1454860394_n.jpg

Cleaned the table

417165_10151140725742717_252592159_n.jpg

Its a table I bought from Toyota in my country they where moving to a bigger place :P

293871_10151140725842717_568533917_n.jpg

Took the hood of to see better, only got one light in there

14321_10151140725892717_1885571248_n.jpg

Got a hedders from a british Carina E with 7afe 1800cc engine, made from steel

550889_10151140726112717_532804779_n.jpg

And started puzzleing

33846_10151140726252717_1658927179_n.jpg

Making up my mind wich one fits better

536611_10151140726407717_56530587_n.jpg

And I didn see wery well in there so I put one more light up

483112_10151140726547717_1593033744_n.jpg

Market the downpipe flange

184796_10151140726687717_2016333509_n.jpg

Test fitted the intercooler

197142_10151140726987717_1785416278_n.jpg

Looks splendid

406956_10151140727097717_801022947_n.jpg

Switched hedders and messured for turbo

374498_10151140727192717_1587192209_n.jpg

Then whent to pick up all my tools

308848_10151143266952717_1061466463_n.jpg

Looks like lot of room, but it isnt

552201_10151143267122717_1214732785_n.jpg

And we have a lift off

522237_10151143267417717_1428225059_n.jpg

Now I have something to start with

68364_10151143267612717_1884961137_n.jpg

Bought some 1.5" material

483004_10151145124847717_978117262_n.jpg

Started to cut

604000_10151145124967717_1188211724_n.jpg

Some 45° bits

558942_10151145124922717_151933289_n.jpg

73866_10151145124992717_402227442_n.jpg

552396_10151145125037717_10513523_n.jpg

30361_10151145125082717_941889755_n.jpg

378485_10151145125167717_567411982_n.jpg

535642_10151145125207717_1461237022_n.jpg

Starting to look like something

575167_10151145125277717_673759010_n.jpg

18208_10151145125322717_981432821_n.jpg

295867_10151145125337717_1480988388_n.jpg

308709_10151145125392717_2050961147_n.jpg

550720_10151145125482717_926419361_n.jpg

Cleaning

559023_10151145125522717_856654059_n.jpg

Almoast finished, not going to weld it befor I got the turbo flange on there

197108_10151145125557717_513618472_n.jpg

3500_10151145125587717_1693868356_n.jpg

4hours of work got me here, cant wait to test fit them on to messure for turbo clearense

Enjoy

Link to comment
Share on other sites

how thick is the material you are using ? if its "regular" exaust piping you are using there is a big chance that the header wont take the heat and migth destroy the engine/turbo

take a look here http://www.sdsefi.com/techheader.htm

Its "regular" material (1.55mm), Ive seen many use this over the internet and some going over 5years without problems

Im going to powdercode them and heatwrap them

You think it wont hold? going to be boosting stock 7psi

Link to comment
Share on other sites


the way i see it this is a part that is going to be super hot then cold over and over again and that puts a lot of strain on the manifoil and you car risk that it cracks,

but if you have seen others use this setup with success then it worth a shot i guess ;)

if you look in that link i added in my previous post you can get some info about the material ticknes that is recommended ect..

love you ingenuity btw :) you have a fantastic project car :)

Link to comment
Share on other sites

Thanks for the answer,

Wow that is a thick material the guy it using for the header, it makes me think this over again, maybe I should do it with thicker

material and then I can hold on the the headers later when I swap for another engine, the plan was to use my 1.55mm thickness

and waste the engine and then take it out and build a new one with 4age stuff in it so this header is not going to be used for

a long time.

But thanks for the post im going to bed and think this over

Link to comment
Share on other sites

  • 3 weeks later...

hold on? 4x4 corolla? fensport told me it would be 20k+!!!! thats why mine isnt 4x4 right now!! what engine gearbox mates? and what ecu and loom do i need? is the tunel ok to fit prop shaft? and will i need to cut Shell to fit 4x4 rear sum frame? to go better than the 20v engine in fwd you would need a gt4 2.0l turbo to comensate for the power loss with the 4x4 gearbox?? please let me know what dose what? can feel a winter project coming on!!!!!

Link to comment
Share on other sites

  • 3 weeks later...

hold on? 4x4 corolla? fensport told me it would be 20k+!!!! thats why mine isnt 4x4 right now!! what engine gearbox mates? and what ecu and loom do i need? is the tunel ok to fit prop shaft? and will i need to cut shell to fit 4x4 rear sum frame? to go better than the 20v engine in fwd you would need a gt4 2.0l turbo to comensate for the power loss with the 4x4 gearbox?? please let me know what dose what? can feel a winter project coming on!!!!!

Well...

I don´t know if these ones came in your country og the countrys near by

AE10 4wd my friends old car

l.jpg

l.jpg

With my old silvertop rebuilt with stock 4wd trans

l.jpg

l.jpg

Came orginal with 7afe engine all "A" blocks have same pattern

l.jpg

Finished and sold to his brother

l.jpg

l.jpg

AE11 4wd facelift my old one, has the same stuff but tranny is little bit different dosent have a center vacum difflocker controle so its always open diffed

l.jpg

l.jpg

l.jpg

The 4wd tranny with vacum difflock age from 1988-1997

l.jpg

Floor from a AE10 body wider then any other Fwd corollas but you can fit the driveshaft in a Fwd floor

l.jpg

4wd tranny being fitted to a 4afe 1600cc engine same block as 7afe and 4age 20v exept the 7afe already comes with the center diff already grinded out of the block

l.jpg

l.jpg

The spot you have to grind out

l.jpg

Test fitting

l.jpg

l.jpg

Almoas there

l.jpg

Done grinding, the oil pan has a shape just for the center diff to fit so no altering there, same shaped oilpan in 4afe, 7afe and 4age 20v

l.jpg

l.jpg

My old AE10 wich I made 4afe 1600cc because I blew up the 7afe drifting it, yes its RWD because of the center vacum diff possibility you can lock it up and take the front axles out

but keep the CV joints bolted in the hubs and in the tranny so you wont brake the front bearring

and the gearoil wont leak out.

l.jpg

Lowering it just to make it drift more

l.jpg

l.jpg

Added 17" rims 215/40r17" tires to make it slide longer and easyer I miss that toy

l.jpg

l.jpg

l.jpg

This AE95 uses same tranny but I think it is some stronger then age 1993-2000 type

that one was also Rwd had it for a year like that and so much fun with it, oh god I love Toyotas

l.jpg

So safe to say what is the best model of 4wd corolla to use to make your car 4wd is to find

the same body as your car or take the one closest to your age, I used 1998 bygeye front end AE11 drivetrain and had three AE95 trannys laiing around but used the 1998 4wd first but blew it

and then put in the AE95 one age 1988 and it has been trough alot but nothing has come up.

use the harness and ECU that goes with the engine your going to use in your car!!

have more questions just ask buddy

Now for the continue of my G6 4wd Turbo project on a 7afe stock engine and 7afe harness and ecu.

Completed the flange that welds to the hedders to connect the turbo and hedders

14529_10151195511397717_1518367985_n.jpg

Cut new matterial for the hedders 3mm thick

603370_10151195511262717_525902185_n.jpg

398514_10151195511087717_761456907_n.jpg

Cut the hedders open and made this ring to lign right, havent welded anything yet have to find the perfect alignment

406686_10151195510912717_1582986897_n.jpg

Step by step...

15771_10151195511362717_1244062864_n.jpg

More to come..

Link to comment
Share on other sites

Human crap I just spent 3 evenings editing page 1-10 and added all the missing pictures and edited some of the long texts

Now eveyone can enjoy full picture quality with a brusky and soma snack :cheers:

Edit: for got to say, Merry christmas everybody and a happy new year!

Link to comment
Share on other sites

  • 1 month later...

Wow

time has a rocketship motors in my life, I cant belive it sometimes

I lost my job at the boneyard company, got a new one the same day at the Toyota dealership painting cars

I was so happy like a bird finding out why he could only sing when he talked, lost that said job two months

later and have been searching for a job since, it has been four weeks now and I´ve been to 50 places and

I can tell you that I thing God or his son Jebus are trying to make me feel bad but Im super

awesome and I cant make this small !Removed! be in my way...

:flowers:

So to make up for the monney issue ive been buying cars, fix and selling them to buy other cars

and so on and so north

But Ive also been doing some turbo stuff in the G6, I want to get it on the street so I can use it

to pick up cars around my country because its so good to drive for a long period of time.

Picture time, cleaning the turbo inside and out

405736_10151291353487717_683753723_n.jpg

Finding out where to lign the plate to bolt the turbo on

603370_10151195511262717_525902185_n.jpg

398514_10151195511087717_761456907_n.jpg

Test fitted

377692_10151291353222717_1562060890_n.jpg

377656_10151291353902717_1645409723_n.jpg

Completed the welding

72961_10151291353382717_1325457269_n.jpg

557790_10151291353257717_914950576_n.jpg

Have to grind the welds and paint

600467_10151291353522717_1179980157_n.jpg

69288_10151291353707717_779910033_n.jpg

Turbo back on

404840_10151291353757717_1226526463_n.jpg

Checking out the lignment for the intercooler input

11951_10151291353887717_541224010_n.jpg

Starting on the downpipe flange

72611_10151291352802717_1518253063_n.jpg

535878_10151294818182717_996236129_n.jpg

426725_10151294818247717_513841257_n.jpg

601015_10151294818462717_1479529602_n.jpg

538142_10151294817997717_346290337_n.jpg

Bought the downpipe material

526489_10151294817942717_649996337_n.jpg

377759_10151294818047717_788266375_n.jpg

Made some parts that bolt on the turbo, oil in and out, air in and out

481491_10151294817912717_346995100_n.jpg

Perfect fit, now just to buy some fittings

534899_10151294818542717_1056905936_n.jpg

And Ive already started it to hear the turbo wine little bit, love that no-downpipe sound

Then found this picture taken Mars 24. 2012 making me want to finish this Turbo stuff and go dive it!!

536920_10151253876762717_1757219873_n.jpg

more to come

Link to comment
Share on other sites

Spent some time in the garage last night

Finished grinding the drilleholes out and making it look smooth

395693_10151300220212717_348858015_n.jpg

69285_10151300220312717_1307085023_n.jpg

17666_10151300220157717_858093166_n.jpg

then had to buy a new grinder blade (whats it called?) to make the downpipe

537802_10151300220432717_21014470_n.jpg

First two bids

72617_10151300220442717_1208782138_n.jpg

Then some hour later after carefully thinking how to lign everything

377652_10151300220597717_59695954_n.jpg

528649_10151300220657717_355986328_n.jpg

529530_10151300220772717_1626851240_n.jpg

It just misses the waterhose, have to wrap both the downpipe and the hose into some headsheald thingee

45844_10151300220842717_920929168_n.jpg

This will hopefully let the turbine reach maximum flow littlebit faster :spiteful:

529870_10151300220202717_573379197_n.jpg

TRD boy is out...

Link to comment
Share on other sites

  • 3 weeks later...

I can smell the summer!!

Making room to unbolt the oilpressure sensor

62125_10151312923862717_2147111423_n.jpg

There was not enaugh room for a spanner but I got it out

29006_10151312923977717_103865464_n.jpg

Going to the fittings store

5989_10151312924022717_1956518152_n.jpg

My intercooler stuff colection

18522_10151312924007717_304764315_n.jpg

Downpipe and hedders ready for alignment therapy

17613_10151312924142717_1778071240_n.jpg

Yea I got a set of 310 Supra injectors

521496_10151312923932717_585619644_n.jpg

Got a hold of some of my gauges and bought two new

602004_10151312924097717_1083102290_n.jp

Trying to fit two 90° 63mm pipes togeather

188199_10151312924067717_629366233_n.jpg

Getting the feeling on how I want to have it

10955_10151317747217717_1048097059_n.jpg

Not shore, I dont like the looks of it, to mush room ont the intake side of the engine bay

188350_10151317747277717_420141454_n.jpg17026_10151317747387717_1699394061_n.jpg

Found a blow off in the shelfs burried in a box

524997_10151317746812717_1563087388_n.jp

The intercooler I was planing og using, now I dont know...

541020_10151326338702717_1224200385_n.jp

Because I found this in my shelf

487306_10151326338667717_944988304_n.jpg

Big differens, but Im still making up my mind who to use, dont want a Turbo lag

644653_10151326338697717_1186816241_n.jp

Went on with bussiness

21900_10151317746722717_680761471_n.jpg

Drilling away

19802_10151317746667717_186376288_n.jpg

521460_10151317746907717_396573884_n.jpg

Making a intake adapter plate

318168_10151317746977717_810391188_n.jpg

Then 50mm pipe will be welded on there to bolt the cone airfilter

545776_10151317747022717_2134891432_n.jp

Did some shopping

47846_10151317747167717_395322245_n.jpg

Vecum hoses, oil to turbine with T-bung adapter

46979_10151317747417717_1052465911_n.jpg

Hope it fits the block remember no room

602229_10151317747462717_743510030_n.jpg

some water inputs from engine to turbine and back

487278_10151317747537717_571769172_n.jpg

Water flange thingee, need to face the one on the right to align like the one on the left

549233_10151317747577717_1866873235_n.jp

Hope someone likee?

Link to comment
Share on other sites

Rwd Tercel stuff

480656_10151312908782717_1987158316_n.jp

Love those summer rims

12647_10151137105672717_2042097586_n.jpg

Winter mode, exept the winter never came really

11163_10151326322992717_1988499348_n.jpg

524632_10151326323197717_2063945137_n.jp

406341_10151326323167717_1359949502_n.jp

Standing on the roof of my new house, making plans on how the driveway should be

557871_10151326323247717_267035458_n.jpg

Steep hill

32155_10151326323317717_758226571_n.jpg

Then plans for the summer is to look for rust that needs care, powerfull engine swap

and rear drivetrain rebuilt with a Mitsubishi 8.5" LSD differential with shorter housing

to fit the body, lug pattern change the rear to fit 4x100 rims, new drivehaft.

Powerplans that I can choose from are these:

1.

20v Blacktop engine and T-50 ae86 box

2.

16v Bluetop engine with home made bolt on turbo and

k-50 stock Tercel box or T-50 ae86.

3.

And the newest one is a ka24 engine from a nissan

with a good Rwd gearbox that holds up to 500hp

and to top that a Garrett turbine with home made bolt ons

stock hp/Nm ratings

20v Blacktop 165hp/162nm

16v Bluetop 124hp/132nm - with turbo about 160-180hp

ka24 155hp/206nm - with turbo about 180-220hp with tonn af torque!

Cant wait to start on the Tercel!!

Link to comment
Share on other sites

  • 11 months later...

Hi! First of all, extremely nice cars!

I'm thinking of convert my AE92 GTi myself, what car does the rear diff that you use come from? :)

Link to comment
Share on other sites

  • 2 years later...
On Tuesday, February 25, 2014 at 4:36 PM, MostWanted93 said:

Hi! First of all, extremely nice cars!

I'm thinking of convert my AE92 GTi myself, what car does the rear diff that you use come from? :)

 

Thanks man

It's been done. In poland.

My diff came from an ae101 or ae111 body same drivetrain!

Diff size is 6.5" same as ae86 zenki so you could buy a lsd from an zenki ae86.

 

16252228_10154309477642717_5156945658779942004_o.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership