Jump to content
Do Not Sell My Personal Information


Egr Valve


paulrob2808
 Share

Recommended Posts


Can anyone direct me to where i can get a step by step on how to remove the EGR valve of a 54 plate verso please.

Here you go:

http://www.toyotaownersclub.com/forums/index.php?showtopic=97232&view=findpost&p=906588

Easy but mucky job, needs a can of carb cleaner, a box of latex gloves , loads of paper towls & an old toothbrush! (Be careful with the gaskets when you take it off).

Link to comment
Share on other sites

Easy but mucky job, needs a can of carb cleaner, a box of latex gloves , loads of paper towls & an old toothbrush! (Be careful with the gaskets when you take it off).

What probs u having with your car. Had mine done last week didnt make a differance on my economy,

but made alot of differance on the performance.

Link to comment
Share on other sites

Hi thank you for the help. the problem i have is the power loss problem and when ticking over the engine sounds uneven on the revs. read about these problems and some said about cleaning the valve. just thought is cant hurt giving it a clean. the car has done 70k

Link to comment
Share on other sites

Hi thank you for the help. the problem i have is the power loss problem and when ticking over the engine sounds uneven on the revs. read about these problems and some said about cleaning the valve. just thought is cant hurt giving it a clean. the car has done 70k

Its a good place to start & you can DIY. Ask the dealer to do it & you're going to get a £75+ bill.

Try not to drop too much of the cack down into the manifold though - just go slowly and scoop it out. Don't over tighten the bolts when you put it back together.

Link to comment
Share on other sites

Hi thank you for the help. the problem i have is the power loss problem and when ticking over the engine sounds uneven on the revs. read about these problems and some said about cleaning the valve. just thought is cant hurt giving it a clean. the car has done 70k

Ye well worth doin will make a lot of differance. I didnt do it my self i got a mechanic to do it he works for toyota and does a bit of work on the side, charged me £40 but i made sure he did a gud job.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership