Subaru Bumper On An Ae92

[KPARRIS-JONES]

Hey all,

Been a while since I posted up much here.

I have started looking more closely at the Subaru bumper and I noticed that miib14 had one on his Corolla 4 Door. I think it's off an STI turbo and I am looking at getting one off eBay.

I'll only do it if they are a direct bolt on and my Headlamps will fit.

This one is the bumper I am looking at, minus the grill:

So, does anyone know if they fit directly?

Thanks for any help,

KP

[dawesy]

nope :( IIRC the bumper is wider than the rolla so needs to be spliced to fit also brackets need to be made to fit it to the car.

i know its old hat but the GXi bumper is a lot mre straight forward but has been done a few times now.

tis a shame there really isnt much in the way of kits for the gti

only place that ive found anything was here clicky but getting it sent here might be a bit difficult

[KPARRIS-JONES]

Ok then, thanks mate.

I'm saving that site as it may come in handy later on... :D

KP

[Gordy75]

Ive also wondered about the impreza bumper and one day im going to make a p1 bumper fit my corolla but not for

a long time if its that much effort! Those guys on the link make some good stuff, the f&f front bumper looks cheap in real life though! Theres a list of stuff I whant from those guys but they didint reply to my last email but the annoying thing is

I used to live 15mins drive from theyre main branch in Jo'burg!

New bumper on its way soon though!

[corolla_tsport_54]

that corolla looks sweet with scoob front - never seen that before, lush!

[KPARRIS-JONES]

I know right!? They're sweet, but because of the extra bodging I won't be doing that just yet. I need to keep my pennies for vital things. Such as a set of Koni Shocks and Springs for example :D

I think mine will be a looker anyway :D

[miib14]

the bumper is more or less a straight fit apart from !Removed! two screws in to the bumper either on both sides, as the subaru is abit wider than corolla.

im using the v 3/4 bumper

and a friend abroad in the us is using a v 5/6 bumper.. (going to change to this later on...)

ishaq

[dawesy]

thought there was a cut to be made

looks good, not sure how it lines up on the AE92 thogh as the wings need mods to get the 101 bumper on

[miib14]

no you dont have to but like i said 2 screws on either side of the bumper seemed to work, thats probz why someone cut it. it is roughly 1-2 inches wider than stock corolla bumper..

ishaq