Jump to content
Do Not Sell My Personal Information


Previa Diff Filler?


crusti
 Share

Recommended Posts

Previa 97

IMG_20120720_102116.jpg

Is that nut in the middle the filler hole? Normally you`d find a filler hole about 3/4s of the way up. I have tried to remove this nut but it appears stuck (even with an impact driver)

I have been emptying the diff then refilling 1.5 litres via the tiny bolt hole at the top (takes forever :( )

I read somewhere that Toyota used front diffs from all-tracs upside down to save on costs when the prev mk1 came near the end of it life, has anyone else heard/ can confirm this? It would explain why the hole is too low.

Many thanks in advance if anyone can help me.

Link to comment
Share on other sites


Hello,

That is the filler hole, you need to get it open and fill ind oil to it comes out.

Do not put to much oil in, because it will heat up your dif. gear.

The top hole is for the hot air to get out, remember to clean the top ventil.

- Allan

Link to comment
Share on other sites

Thanks Allan,

I didn`t know the top bolt is a breather, I haven`t seen a hole to the top bolt, I will check that straight away

Cheers

Neil.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership