Sign in to follow this  
tonethetones

Hilux 2.4

Recommended Posts

I am doing a slight rebuild on my 2.4 d and am putting on new rings stamped on the piston cron is a letter B and the number 2 I can not find any mention of oversize \I wonder are these std pistons any help much appreciated thanks Tony

Share this post


Link to post
Share on other sites

Standard pistons are marked, 1, 2 or 3 and vary slightly in size, depending on the number. You have a standard number 2 piston by the sound of it. They were only ever mad to go one size up and that is 0.5 O/S

Kingo :thumbsup:

Share this post


Link to post
Share on other sites

Standard pistons are marked, 1, 2 or 3 and vary slightly in size, depending on the number. You have a standard number 2 piston by the sound of it. They were only ever mad to go one size up and that is 0.5 O/S

Kingo :thumbsup:

thanks ,would that mean I need oversized rings ordering 0.5 os I got some std rings they are to small thanks Tony

Share this post


Link to post
Share on other sites

NO, if you have standard pistons you need standard rings, if they dont fit, I suspect the rings are the wrong ones for the job

Kingo :thumbsup:

Share this post


Link to post
Share on other sites

Best to try your local engine rebuilder, or a local parts trade motor factor, most have access to those sort of parts, people such as Euro Car Parts and the like

Kingo :thumbsup:

Share this post


Link to post
Share on other sites

i bought rings from toyota when i rebuild my 2.8 and they couldnt tell me if i had std or oversized,

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this