Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

Upgrading The "big 3"


surfcitylocal
 Share

Recommended Posts

I'm getting ready for the new audio system installation so I decided it was time to upgrade the "Big Three". I ran 0 gauge wire from the alternator to the Battery and from the negative Battery post to the engine and body ground points. The stock Scion wire is really small and doesn't allow for as much current to be passed as I'll need with all the amps installed. By adding the 0 gauge wire it gives a much larger path for the power to run through. My grounding point is also a more solid point than the stock location. From the factory the ground lead connects to a bridge piece above the strut on the driver side. It has to rely on the strength of the weld to flow to the body. I used a grounding point that is on the main body and makes contact directly without any welds. This will provide a path with my less resistance than the stock.

Here are pictures of the stock wire connections...

The alternator...

DSCN2834.jpg

The body ground...

DSCN2837.jpg

And the engine block (this location is fine and is where I connected my new 0 gauge wire)...

DSCN2850.jpg

Some of the tools required to solder the new 0 gauge connectors to the wires...

DSCN2845.jpg

The new 0 gauge wire from the alternator to the Battery...

DSCN2853.jpg

DSCN2854.jpg

The new 0 gauge ground wire from the battery to the strut tower...

DSCN2856.jpg

DSCN2855.jpg

DSCN2858.jpg

And the completed project...

DSCN2857.jpg

I've done this to several of my cars that have had high performance audio systems and it really makes a big difference. More power to the amps means better sound and no dimming of the headlights.

Link to comment
Share on other sites


LOL

I just have to figure out where to mount it...

flux-capacitor.jpg

Link to comment
Share on other sites

Nice one, you even got one in a white box to match the car. I think the only space you'll have left will be up on the roof lining inside the back over the rear seats, or would it invade the space taken by the aerial? Of course, you just know after having it fitted you'll have to fit the Mr. Fusion 'blender!'

:clap:

post-113536-0-80296800-1354822809_thumb.

post-113536-0-64363300-1354823150_thumb.

Link to comment
Share on other sites


And I'd have to find some cool clothes like Doc Brown.

Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership