Jump to content
Do Not Sell My Personal Information


Oil Change Light


Recommended Posts


Turn the key on. Observe the odometer. Is "ODO" displayed? If not, push the trip meter button until "ODO" is displayed, with the total mileage travelled shown.
Turn the key off.
Push & HOLD the trip reset button until advised to release it.
Turn the key to "ON" (do not start engine)
Observe the ODO display.
You should see 5 dashes, then 4, then 3, then 2, then one, and finally, five zeros.
The original mileage that you observed should be redisplayed.
Release the trip reset button.
The proceedure is now complete.

Link to post
Share on other sites

Rastlins procedure is correct but try this

Set odometer and two trip meters to trip meter A with the engine switch ON,and turn it to the lock position.

Turn engine switch to ON position while pushing trip meter reset knob.
Do not start the engine,but keep pressing the reset knob.

Release the reset knob more than one second after the trip meter displays 000000.
The system should now be reset.

Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...




Forums


News


Membership