Tow Bar Wiring

[smorroll]

Can anybody tel me how you get a towbar cable from the towbar outside into the wiring loom inside above the RH wheel in the boot on a RAV4 (1998 and 2002). The only route I can find seems to have avvery small hole (~1/4") between the channel below the boot and the space above the wheel where the loom is. There must be an easy way to get the cable in?

thanks

Shaun

[justhejob]

Hi its not always easy to run the cables so you may have to make a suitable hole or enlange one that is already there, protect the cable with a suitable grommet .

Hope this helps