Jump to content
Do Not Sell My Personal Information


I'm in for the LONG HAUL... :<)


tooSavvy
 Share

Recommended Posts

Convoluted & Complicated [..as if] collekshunneering of Alloy Wheelnuts.

 

Back to Pringles Breakers, by the Tyne. Proper old skool..3 High!

 

Enquired about 16 FORD Alloy Wheelnuts = £fiver icon_razz.gif

 

Next question... where are they? (all wheels come off/sold for tyres) "In the footwell, M8" x4 corners. icon_confused.gif

 

Got many Fords in, I asked. "A few down the back and a few Ka in recently... alloys on them I think".

 

So far... So clear...

 

 

With my Vizzie + HardHat, I toddles off down the unit and out the back to the hardstanding. The yardman is passing me by and heading to get the lorry & leave.

 

I find a Focus at floor height = 3+Locknut drivers side & same passengers side. SO SIX ! No other nuts in it, in the back seats/dash/hatch... Gahh!.

 

No other Ford in view except for the two Ka.... YEP.... on the bloominn top shelf!! I'm not built for spiderman duties so I will drop back round next week.

 

I paid £2 for my six, and will pay another £3 when I get the other 10 icon_mrgreen.gif

 

FORD%20AlloyNuts_1.jpg

FORD%20AlloyNuts_2.jpg

 

My wheels are stacked awaiting the full set of nuts... mocked here, with the new plakkie CentreCap (bath silicone stuck, because it rattles in the centre hole).

FORD%20AlloyNuts_3.jpg

 

..... should be well smart, I reckon icon_cool.gif

 

 

2sav

Link to comment
Share on other sites


I now have my 16, and in good clean condition.....

FORD_16Nuts.jpg

Fitting next... When I get a day off!

 

2sav

Link to comment
Share on other sites

You'd be better to get some locking wheel nuts else some of them monkey hangers will come up and steal your allys, you know what they’re like :biggrin:

  • Like 1
Link to comment
Share on other sites

YaY... I have had my 'Reversing Sensors' popped thru the letterbox.....

I am looking forward to relaxing as I reverse into my street parking, between the neighbours cars... I am really guessing atm.... there is a lot of 'VaVaVoom' hanginn out there :ohmy:

Reverse_Bleeper.jpg

We will see how things work out.....

Comes with a neat holesaw, for a clean hole in the plastic bumper... lol

 

2sav

Link to comment
Share on other sites

Oof!! A large £wedge winging its way to 'Micks Garage' for a suite of fresh undercrackers, on 'Toyota of much Mintyness'©

Fitting & MOT hopefully in that order :balloon:


2sav

Link to comment
Share on other sites


5 hours ago, TomdeGuerre said:

2sav - Y R U speaking in tongues? 

4x Dampers, 4x Droplinks, 2x F & 2x R Rollbar Bushes. ?'undercrackers' = undercarriage/landing upon wheels... :ph34r:

Toyota of much Mintyness... well, bar the skaggy door... it has much to claim the Mint of Barely Used :tongue:

2sav

Link to comment
Share on other sites

Ah that's better 2sav, I suppose it's difficult when English isn't your first language izzat no' rite?. Itz no' ma furst lanwij eethers, Jock-ese is mah naturelle but ah manaje tae get by.

  • Like 1
Link to comment
Share on other sites

ooofff!!

HI-Line RED LED Brake light plopped thru the door earlier....

HiLine_Brake.jpg

--00box-2.jpg

2sav

 

Link to comment
Share on other sites

My parts, from Micks Garage Ireland, have arrived at Heathrow today...

2sav

Link to comment
Share on other sites

Ah'll bet ye can hardly sleep the nicht 2sav.

See that electric fire thingy for yer back windae, ye divvn’ want to fit that tae yer wheels man, ye’ll look a propa doylem. Like fitting a tiara tae the toon bike, its still the toon bike yer riding. Have a gander at these genuine period Hi Level Stoppers and ahm open to offers. Ah mean ah divvn’ want to push ye canny lad but shy bairns get nowt.

Hi Viz Brake Lights.jpg

  • Like 1
Link to comment
Share on other sites

SWMBO is complaining of large quantity of boxes in kitchen....

My Boxes.... WooHoo... :balloon:

Update **

YaY... I have a 'full house', whoopee :smile:

 

TS

Link to comment
Share on other sites

My 'MOT Man', he has been MOTing my cars for years, has opened the bidding @<£300 to do my Damper works :-

*Fit Dampers

*Fit Droplinks

*Fit ARB Bushes

Oil/Filter/Airfilter/Check Gbox levels.

Steamclean engine (it is minnginng...) [prior to cleaning, a forensic examination to see where oil is coming out/afterwards we will see!!]

...oh & MOT it :-P

 

*Parts supplied

 

TS

Link to comment
Share on other sites


No one drives this car but me... therefore, I have little opportunity to use any of the other doors/doorhandles.

So when I grabbed the front passenger doorhandle, to open it for something or other, it WOBBLED in & out icon_confused.gif .

Me dunna lyke krappie bitz!!

 

Yesterday was an 'off shift' and the rain wasn't due till 5 icon_razz.gif

Got the car round the back and started on the door strippage....

 

Handle_Fixed1.jpg

 

Handle_Fixed2.jpg

* googling got the lowdown on how to get the armrest & switchplate off.

 

Handle_Fixed3.jpg

 

... I was fairly certain someone had been in b4 ...

Sure enough... the captive nuts (with fixing hex bolt tightened in) were revolving in the plastic handle.. so no more tightenees icon_sad.gif

Using determination/brute force & ignorance I managed to get the 'captive nut' to break out of the handle. I removed the handle after unclipping the rods - total quality fittings and a delight to work on!!

 

I spot drilled through the void [where the captive nut had been] a small pilot hole... opened this up to take the countersunk bolts I had in hand/Csunk the plastic on the handle outside (covered by the finger pull handle) to allow the bolts to lie flush.

 

Handle_Fixed4.jpg

Handle_Fixed5.jpg

Handle_Fixed6.jpg

 

This is the little bu99er which caused all the hassle.....

 

Handle_Fixed7.jpg

 

... a great deal of satisfaction gleaned to feel the handle as it should be... a *spot of Black on the heads & dunnz dunn icon_mrgreen.gif

* paint will wait... started to rain....

Earlier, I did a bit of shopping at my local Car Acc Shop...

Rusty_Stuff.jpg

This lot is for my rear sill ends/arch bottom.

 

Biggest smile of the day was saved for the till.... He was a dweeb, but chatty, and keen to know about my Toyyo = Not really concentrating on the cash transaction....

The receipt comes out of the till and the bottom clearly states the total to pay (£13)... so he rattles into the till [my £20 in hand] and gives me YES... £13 change.

I'm outta there..... icon_cool.gif

 

2sav

Link to comment
Share on other sites

We had a 92 carina, nice car and kept it for 12 years. The only thing that it didn't have was air con.

Link to comment
Share on other sites

My car disappeared thismorning..... with a bootful of expensive kit....

 

It should 'Bounce [controllably] Back' teatime tomorrow :angel_not:  Oh YaY!!

 

2sav

Link to comment
Share on other sites

WELL....!!

 

 

..... where to begin :-P

 

OK then... THE END!!

 

16_17_MOT.jpg

 

During 2014 she did 3739 miles/15 did 3187/ and this 16 did 6342 [1345 in my ownership].... hardly taxi work :mrgreen:

 

 

I wish to announce the NEW Carina ll, 25 Years Young & reborn.....

 

GONE is the wallowy, disconcerting heave and floppiness and rear shuffle.....

 

ENJOY an almost serene 'waft', with the tyres being pummelled by the force of the struts + the comforting 'bonggle/thwump' of a taut chassis being deflected by our totally $hite roads.....

 

I AM now getting exactly what 'the Son of the Rising Sun' was licking his sliderule for..........

 

Oh JOY, Oh Fountainhead of motoring yumminess......... enough, already...

 

Got the car back.... two rear rubber brake pipes needed replaced when the rear struts were removed + the rear strut shrouds had to be renewed :-( 

 

 

Full service and MOT  £350 (I supplied £230 of parts)

 

 

2sav

Link to comment
Share on other sites

  • 2 weeks later...

I have been to see a chassis welder/MOT guy and arranged to get my n/s sill end 'cut out/plated, left with galv weld thru sprayed over'- I will finish the prep&paint after.

£60 cash. Saturday, drop off 1pm & collect 5pm :cool:

 

2sav

Link to comment
Share on other sites

.... short overview of 'where we are now'.....

 

1. How it should look!

Original.jpg

 

2. How I saw it on Day One....

As_Bought.jpg

 

3. A bit of a hole appears... Splashed some splodge on!

As_today.jpg

 

>>>> a final piccie will show what the welder gets up to...... Saturday.

 

 

2sav

Link to comment
Share on other sites

Welder guy stiffed me..... got to his lockup & All LockedUp :sad:

 

I will cruise by on Monday & enquire...????????

 

2sav

Link to comment
Share on other sites

Did you give him any advance sub 2sav? He'll be down the boozer, u know what they're like.

 

When you go to see him remember Teddy Roosevelt, speak softly and carry a big stick

 

A Big Stick.jpg

  • Like 1
Link to comment
Share on other sites

Ha ha.... Nahh, M8

Worse... but!  I work a rota with only every second weekend off... I shafted a few 'see you then' promises to be available at 1PM on a Saturday :angry:

BummHatts

 

2sav

Link to comment
Share on other sites

..... Hmm... Claims to have turned up after I had been (all locked up) and I had gone. Likely story!!

He will do it Wednesday night, 4:30.

I will hang about & take some piccies...

 

2sav

Link to comment
Share on other sites

2 hours ago, tooSavvy said:

..... Hmm... Claims to have turned up after I had been (all locked up) and I had gone. Likely story!!

He will do it Wednesday night, 4:30.

I will hang about & take some piccies...

2sav

 

Is this welder called Donkey?

Claims he turned up after you left............

….. hee haw,,,,,,  hee haw he halways claims something like that.

 

Take piccies? Aye, piccies of Donkey’s physogue and put them on your dartboard.

 

Do you know why welders are like pros?

Because you usually find them in awkward positions screaming for more rod and more money.

 

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership