Jump to content
Do Not Sell My Personal Information


Injector removal - issues


onthegow
 Share

Recommended Posts

Hi All. Rav4 D-CAT T180 57 plate 

 

I have issues with an injector leaking gases, I want to remove the injector any tutorials on here. there is lots of carbon deposited around the injector and i,m guessing it must have been leaking for a while, no loss of power so bit strange, I see two other injectors are also starting to leak as I can see carbon deposits. 

do these injectors sit on some kind of seat and thats why it's leaking from the underside of the injector!! 

any helps would be appreciated. I will try and add a picture 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

Edited by onthegow
Add images
Link to comment
Share on other sites


Has anyone got a PDF repair manual to show me how to remove the injectors and what the torque settings are etc when i put them back in. !! 

Link to comment
Share on other sites

So I got the leaky injector out. But there is always a but the brass seal is stucknin🙁

I have managed to get the second leaking injector out. Caught it in time and the seal popped out easily. 

The other two injectors are in solid😭😭😭😭

so one down 3 to go, one a night so should have it all done by the weekend. Plus I now have a painting job on too. It's going to be a long weeeeeekkkkkkk. 

Thsnks for all the info 👍

Link to comment
Share on other sites


Success the job is fine 4 X injector seals replaced. 

Eirth burying a injector seal remover and a 23 mm spanner to work the injectors free. 

Total time 6.5 hours, seals £20  

total saving £££££££ worth a little time invested. 

Thanks for all your guidance. 

Link to comment
Share on other sites

  • 4 years later...
On 10/4/2016 at 8:36 PM, onthegow said:

Success the job is fine 4 X injector seals replaced. 

Eirth burying a injector seal remover and a 23 mm spanner to work the injectors free. 

Total time 6.5 hours, seals £20  

total saving £££££££ worth a little time invested. 

Thanks for all your guidance. 

Any chance you could tell me more about removing injectors with a 23mm spanner 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership