Jump to content
Do Not Sell My Personal Information


Parts for Avensis t-spirit d4d parts 2ad-ftv


Reece cycle
 Share

Recommended Posts

Im struggling to find parts for the car I bought the other day. Specifically valve cover gasket (I also think I need a bolt for holding the injector in place)

2005 avensis d4d t spirit i believe it has a 2ad-ftv engine, and i cant find the parts anywhere.

my first Toyota  (Ive owned a Lexus is200 previously and have Toyota down as nice and reliable, and its a nice clean car throughout despite its high mileage and current troubles so i do want to fix it

Symptoms are the 4th cylinder injector is loose and bouncing up and down with the compression,

Fair bit of noise and a decent amount of white smoke from engine bay

Fails to fire 

Would I be right in thinking it's a broken retaining bolt,

Is there and underlying issue to look out for or any further damage that could have been caused.

Thank you very much for you help 🙂

20180923_122633.jpg

20180923_122637.jpg

Link to comment
Share on other sites


Its likely the injector retainer clamp is either loose or broken which is allowing the injector to hop up/down with the cylinder compression.

You will need a new rocker cover , injector seals, pipe seals etc as they are all one use only and possibly a new clamp if it is snapped

2adfhv 1.png

2adfhv 2.png

2adfhv 3.png

Link to comment
Share on other sites

Thanks that's beautiful exactly what I needed,

When you say new rocker cover, i assume you mean rocker cover gasket?

Do you reckon there would be an underlying issue that could have caused it?

Is the injector likely to be ok?

If somethings broken off then i assume that could be a major issue for the engine?

 

Thanks again 🙂

Link to comment
Share on other sites

So I opened it up, 

Retaining bolt was loose.

I assume I will need to replace it?

The bouncing piston also broke the piece attached to the injectors,

Part 23761a 

Snapped at the weld where the pipe connects to the ring that attaches to injector on cylinder 4

Im struggling to find the part, there's many variants and the only options I've found have 2 week delivery 

I've been quoted £20 to braze it back together but he's saying he's busy so will get it done some time this week.... 😞

 

Also all the clips are broken part 23760a

They seem to just be like 2 joined copper washers, i assume that's fairly straight forward to find something suitable to replace them with.

Just hoping someone can throw some ideas out or give me some more option,

Im real excited to get it all back together, so really appreciate any help 😄

 

242266086_2adfhv2.png.811812df366a494e69fd8c770e52a291.png

Link to comment
Share on other sites

Change the Bolts for clamping the injectors in place, as these are stretch bolts.

Once you get the injector out there will be a load of crud down in the tube, this will have to be cleaned out.

Also you may need to re-cut the injector seat, using a seat cutter.

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership