Jump to content
Do Not Sell My Personal Information


Bumper!


Ryan1985
 Share

Recommended Posts

Okay i tried 2 take of my front bumper 2day but it wasn't happenin! Could sum1 give us a rough guide on how 2 do this? I took 2 bolts, the 1's under the wheel arch off and the clip where u open the bonnet but there is 2 more bolts 2 undo but i can't seem 2 get 2 them!!! :ffs:

Is the non-colour coded part i want off!

Front.jpg

Cheers :thumbsup:

Link to comment
Share on other sites

I think (and I'm not tatally sure about this) that you have to remove the greay bit and the painted piece underneath as one part and then take then to pieces. Other than that I'm not really sure...

A

Link to comment
Share on other sites

Thats wild if its true! Anyone else have anymore info on this? Someone must have removed the bumper before? Jaxx u have after ur crash rite?

Cheers :thumbsup:

Link to comment
Share on other sites

From the non-colour coded part down Matt?

Cheers :thumbsup:

Link to comment
Share on other sites


take it all off in one piece.... wheel arch bolts.... clips behind the grill.... then a row of 10mm under holding the splash gaurds and plastic flap bits hanging down... :thumbsup:

Link to comment
Share on other sites

Woooof! Sounds like alot of work 4 so little! So ur sayin both bottom bumpers should come off just with the 2 bolts under the arch and the clips behind the grill?

Cheers :thumbsup:

Link to comment
Share on other sites

do what i did......

drive and hook the bumper on to a tow bar

then reverse

it just pops off..... no screws or bolts, us clips

Link to comment
Share on other sites

do what i did......

drive and hook the bumper on to a tow bar

then reverse

it just pops off..... no screws or bolts, us clips

could you get it back on?

Link to comment
Share on other sites

yea nice an easy

jus popped back into place

and then with the aid of a screwdriver, tucked the wheel arch trims back behind the bumper

could never tell it had been pulled off

Link to comment
Share on other sites

if u do not have a tow bar handy i find if u reverse over a bollard and get it wedged under ur front bumper, if u reverse a bit more it comes of no hassle(sp)

and when ur done to get it back on give it a kick!!!

job done!!winner!

CB :thumbsup:

Link to comment
Share on other sites


if u do not have a tow bar handy i find if u reverse over a bollard and get it wedged under ur front bumper, if u reverse a bit more it comes of no hassle(sp)

and when ur done to get it back on give it a kick!!!

job done!!winner!

CB :thumbsup:

:lol:

Think I'll go with the bolt and screwdriver route but thanks anyway!

Cheers people :thumbsup:

Link to comment
Share on other sites

Think I'll go with the bolt and screwdriver route but thanks anyway!

Cheers people :thumbsup:

I wonder why? :thumbsup:

Link to comment
Share on other sites

Got it done people and thanks 4 the help, looks much better now but i just need 2 get the back bumper colour coded, so if any1 see's 1 at a scrappy or on e-bay drop us a line!

Cheers :thumbsup:

Link to comment
Share on other sites

Get them up as soon as i get photoshop! :ffs:

Cheers :thumbsup:

Link to comment
Share on other sites

Not that u shouldnt have it, as its a sweet piece of software

:thumbsup: Well from what I've seen of it... I can't seem to do anything decent with it, but I'm 'artistically challenged'! :lol:

Link to comment
Share on other sites

jst takes time mate like everything, i use it all the time and learning new tricks and improving all the time, its a god send it u ask me

Link to comment
Share on other sites

I have been using it since version 5.0 ... but not continuously.. most of my photoshopping stuff is trial and error... a bit of luck ;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership