Jump to content
Do Not Sell My Personal Information


Replacing dual zone for single zone in 2010 1.33 Auris


ChrisRussell22
 Share

Recommended Posts

Hi all 

I’m looking to do the swap on the heater/air controls from the dual zone to the single zone in a 2010 1.33 is it a simple plug and play or do I have to change all the other stuff over too? 

01875E68-BD50-4B67-A1D1-4407B7A600B7.jpeg

8DB4A98E-59B5-4855-B1BE-667DD6F619D2.jpeg

Link to comment
Share on other sites


the dual zone will have a different heater / ventillation unit fitted as it

will have 2 heater matrix's so the driver & passenger can have different temperatures

where the standard system will only have 1 matrix, the standard system will

probaby be controlled by cablesfrom the dials and the duel controlled by motors.

it is a jpb that could be completed but it will be a lot of work to do the conversion

and possibly not worth the effort needed.

by any chance does the system have a dual button as this will let you control

both side independantly or together

Link to comment
Share on other sites

Why would you want to go to all that trouble?

If dual zone is not on then it is single zone. Don't select auto and it may all be manually controlled.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership