Jump to content
Do Not Sell My Personal Information


AF Bank 1 Sensor 2 Replacement - 4.2 2003 2.0 VVTi


Chud
 Share

Recommended Posts

I've done my best to see if anyone has done a tutorial etc. in here on this but I need to replace B1 S2 on my Rav.

If I've understood everything right then it is located beneath the CAT on the right hand side (when facing the front of the car) but it looks like a right b***** to get to. Without a guide to follow I'm looking at removing the plastic tray under the front of the car and going in from underneath, is that the right thing to do?

Link to comment
Share on other sites

If I recall I changed mine from the top with no problem, I unclipped the plug and got a proper sensor socket which has a slot in it and I also done it when the engine and manifold was hot as it unscrews easier, fit a genuine denso one as will fit spot on and you may find you have to reset the fault code a few times until it settles down , defo a job you can do yourself.  

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership