Jump to content
Do Not Sell My Personal Information


Wheelhouse disassemble T22


Ironn
 Share

Recommended Posts

hello, who can tell me how to disassemble my wheelhouse from a T22 and how much time do you spend

I cannot immediately find a How to about this

Link to comment
Share on other sites

still no closer to knowing what you mean do you mean a steering box. 

Link to comment
Share on other sites

56 minutes ago, Ironn said:

wheelhouse that controls your wheels😉

Can you show us a picture ?

Link to comment
Share on other sites


13 minutes ago, Ironn said:

ok sorry I mean this

there is internal space in it also do not know if you can fix it
Inner handlebar bullets are okay
and I see clearly when I grab my wheel that there is room in the house (box) but have no play in my steering wheel

 

35E70EE3-9FEA-4ED3-9C59-BF0AA5622CE5.jpeg

 

Link to comment
Share on other sites

hi  in Britain we mostly replace new or reconditioned rarely repair it is very hard to get parts here  

Link to comment
Share on other sites

okay is it a lot of work to replace them yourself?
the supframe must then be completely loosse
Link to comment
Share on other sites

If the OP is talking about the inner tie rods, yes the are replaceable. it's just the access. The rack may not need to be removed, but a new gaiter clip will be needed. If access is not possible and you need to remove the subframe, you might get away with just removing the bolts closest to the rack.
Before going through all that, you can check the play of the joints, by lift the front wheels off the ground, then having an assistant rock the steering wheel side to side while holding various parts from the wheel, and the track rod end, and then while the person holds the steering wheel still, try and rock the road wheel left to right repeatedly, then up and down, and use a lever under the wheel. Some times the knocking sound if any, could also be the brake caliper on the slider pins which have worn, and the drop link to the anti roll bar.   

Link to comment
Share on other sites

okay 👍
The inner ball joints are okay 
I found slack/opserved in the teeth in the house 
so the house needs (see photo) completely replace.   

Is there a how to them🤔

Link to comment
Share on other sites

3 hours ago, Ironn said:

okay 👍
The inner ball joints are okay 
I found slack/opserved in the teeth in the house 
so the house needs (see photo) completely replace.   

Is there a how to them🤔

Haynes manual covered it in the UK. You have to drop the subframe to access the U clamp bolts towards the rear, between the body and steering rack (steering house to you). If you have the right spanners and sockets to access the steering rack U clamp bolts without removing the subframe you could try, so long as the bolts can clear the body.
I have this PDF - 

15_STEERING.pdf

Link to comment
Share on other sites


Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership