Jump to content
Do Not Sell My Personal Information


RAV4 Black smoke, no reaction to accelerator pedal


Timken
 Share

Recommended Posts

Hello,

I have Toyota RAV4 2010, 100Kw, 2.2 diesel. My problems started by bad alternator, there was red warning indicator, so I turned car off. After that i was not able to start this car again, so I replaced Battery and alternator. Car was not starting again so I replaced SCP sensor. Car starts and immediatelly dies. We diagnosed that ECU and ECM is faulty so we replaced it. Car now starts, holds idle speed and black smoke is coming from exhaust, there is only minimal reaction to accelerator pedal. Sometimes I can hear some knock.

I have not this faults:

P0200: Injector circuit/open
P0093: Fuel system leak detected - large leak
P0088: Fuel rail pressure - too high

I performed injector resistance test - three has 2.3 Ohms and one has 1.5 Ohm.

In attachement I have freeze frame data from Techstream.

Do you have any ideas what I can do now?

Thank you!

IMG_20200710_092030.jpg

IMG_20200710_092152.jpg

IMG_20200710_092203.jpg

IMG_20200710_092212.jpg

IMG_20200710_092251.jpg

IMG_20200710_092318.jpg

IMG_20200710_092336.jpg

IMG_20200710_092358.jpg

IMG_20200710_092412.jpg

IMG_20200710_092421.jpg

Link to comment
Share on other sites


After replacing the ECU the existing injector compensation codes will need to written into the new ECU and then pilot injection learning carried out, have these been done?

Link to comment
Share on other sites

Yes compensation codes has been updated, ECU has been reprogrammed to immo unit and fuel supply pump has been reinicialized. I think there is problem with injector nr. 4 which has 5 mm3/st. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership