Sign in to follow this  
michael drummer

Help needed I am new to toyota

Recommended Posts

Hello everyone hopefuly someone will be able to help. I have "Check Parking Brake System" on the dash display. Parking brake works manually, cruse control and shift assistance both not working. I am waiting for my delphi cable and I have used the torque just to get fault code but the torque is showing that there are no fault codes. Car drives smoothly guess it is not a dpf also I have cleand EGR yesterday. Any idea why the torque doe not show fault codes?

Share this post


Link to post
Share on other sites

That a fault with d4d engine a good 2hour motorway drive with fix fault but it will always return unfortunately 

Share this post


Link to post
Share on other sites

is it regardnig dirty DPF you mean??. Why the car is not sluggish then? 

Share this post


Link to post
Share on other sites
3 hours ago, michael drummer said:

Hello everyone hopefuly someone will be able to help. I have "Check Parking Brake System" on the dash display. Parking brake works manually, cruse control and shift assistance both not working. I am waiting for my delphi cable and I have used the torque just to get fault code but the torque is showing that there are no fault codes. Car drives smoothly guess it is not a dpf also I have cleand EGR yesterday. Any idea why the torque doe not show fault codes?

I use different car scanners - standalone Launch Creader8 and an old Netbook with Delphi and Techstream, with the correct OBD2 interface cables for each. They read a lot of systems. Torque should too, unless it cannot read all types of ECU codes? 
I would look on here for answers - https://torque-bhp.com/forums/?wpforumaction=viewforum&f=1.0 

Share this post


Link to post
Share on other sites

Waiting for a cable for delphi but is on the way from china.

Share this post


Link to post
Share on other sites

I disconnect Battery is better light stay of longer I get p400 code  which is the egr valve recurrlation fault not fully clog up only bit but its enough set of fault 

Share this post


Link to post
Share on other sites

I already cleaned the EGR think it is clear enough. Had good motorway drive roughly 30 miles at 3rd gear and over 3000 rpm constantly wiredly shift assistance and cruise control started working yesterday for a while but I was forced to buy fuel shortly after, when restarted engine there was same issue again.

Share this post


Link to post
Share on other sites

Did ya get sorted 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this