Sign in to follow this  
Jollyroger163

Yaris 2009 exhaust

Recommended Posts

Hi all.

i bought a Klarius exhaust for my 2009 Yaris. The rear silencer has gone so thought I would renew from the cat. Made an attempt but couldn’t even shift any of the bolts or remove the lower lamba sensor from the front section. 
Any suggestions???

 

Share this post


Link to post
Share on other sites

Heat and beat, in all honest take it to a garage, It's a 10-min job on a ramp and an acetylene torch

Share this post


Link to post
Share on other sites

If yer gonna tackle it yourself, soak with PlusGas at regular intervals, a few hours before attempting the job.

https://www.plusgas.co.uk/

But as flash22 suggestions, if that's the original exhaust on there, then it may be better to take it to a garage. My rear box bolts were a pig after only four years on the car.

Share this post


Link to post
Share on other sites

it's the exhaust paste they use during assembly it goes rock hard with heat add in corrosion and it becomes a hassle, with slip joints you can slit the tube with a grinder in a few places and hammer and chisel it open/off

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this