Jump to content
Do Not Sell My Personal Information


fuel vapour feed hose replacement


600rob
 Share

Recommended Posts

i need to replace the fuel vapour feed hose shown here on my yaris as the existing one has split and is causing some sort of vacuum leak

 

image.thumb.png.12f3b3faa10fdff98ce2310c2b03ce09.png

 

https://www.megazip.net/zapchasti-dlya-avtomobilej/toyota/yaris-echo-vios-limo-42478/scp10-57196/scp10r-chmrkw-927624/vacuum-piping-17944048#/il-415312754-3866737-3866737

is it okay to just replace with the appropriately sized regular fuel hose correctly routed? or is it important to use the correctly pre-formed section of tubing? since im sruggling to find the actual part available online in the uk

I guess this question applies for all hoses that are pre-formed. Im guessing that if it doesn't need to go round sharp corners the a regular section of hose could be used right??

in my case i could just bend a bit of regular pipe to fit without there being any sharp bends or kinks

 

Link to comment
Share on other sites

As long as it doesn't rub on anything a oil/fuel grade hose will do

I take you have done a smoke test to verify the issue

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership