Jump to content
Do Not Sell My Personal Information


1E distributor upgrade


RenBlu
 Share

Recommended Posts

Hi folks, 

I'm looking to fit a 2e distributor to my 1e engine. The 2e distributor has 3 wires one black, black/orange and blue. If I take the black/red wire from the coil ballast and connect that to the black/orange on the distributor then connect the blue wire on the 2e distributor to the connector that the 1e distributor condenser was connected too, everything should work or that wrong. Long for the long thread 

Many thanks. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership