2016 aygo fog/reverse light conversion

[Matt642]

I am converting my 2016 aygo from a LHD to a RHD and I need to swap the fog and reverse lights around. What is the easiest way to swap the wiring? Is there a way I could switch the connectors at the wiring harness or do I have to cut the wires and solder new wires onto them to cross them around? Any suggestions and locations of where I should start would be appreciated 

[flash22]

it's a lot of work, the hardest bit will be the steering rack, the dash, metal support, and heater all need to be swapped, unless you have a donor car ,the space and the time

all the internal body loom needs to be swapped too

IMHO sell the car and get a RHD one

[TescoExpress]

On 12/15/2020 at 12:29 PM, flash22 said:

it's a lot of work, the hardest bit will be the steering rack, the dash, metal support, and heater all need to be swapped, unless you have a donor car ,the space and the time

all the internal body loom needs to be swapped too

IMHO sell the car and get a RHD one

I agree! It would be much easier to just sell and get another RHD vehicle unless you have almost all of the parts ready from the donor car.