Climate Control Matrix T27
My climate control Drivers side knob goes crazy and will only select Lo or up to 18. Seen a previous post thst the contacts need cleaning.
Can somone let me know how to remove don't want to scratch dash.
I have repaired washing machine motors put new lights on cd player's etc before so should be fine once i get going. Or do i need one of eBay.
I went to my archive back up drives and found some photos.
Remove side trims
Remove panels surrounding gear lever - then remove the ashtray
Lever the vent and radio surround, to separate from the heater control panel -
Unplug the heater control -
To open the unit first use a T10 Torx bit to remove the screws -
There are tabs around the edge -
The heater controls dismantled.
