IgReilly 1 Posted January 21 Share Posted January 21 Noticed it hanging by a thread of the manufacturers gum/glue, lucky it was still there really. Cleaned the gum based glue off the boot paintwork with WD40 (seriously good for gum removal). But what to stick the Badge back on with? Maybe CT1 from Travis Perkins? These new DIY adhesive sealents are supposed to be pretty good? Any thoughts? Quote Link to post Share on other sites
Parts-King 760 Posted January 21 Share Posted January 21 Clean the paint with turps, to remove WD40 residue, and use 3M double sided tape to stick it back on Quote Link to post Share on other sites
IgReilly 1 Posted January 21 Author Share Posted January 21 Not sure that will work, the design of the Badge won't really allow it. Struggling to find a new one at a reasonable price. New ones are like hens teeth. Hardly any change from £30! Quote Link to post Share on other sites
flash22 655 Posted January 21 Share Posted January 21 Most badges use 3M VHB foam tape, is it the Avensis, Toyota Badge ? or the logo ? Clean the Badge and area with IPA (isopropyl alcohol) as it leaves no residue £8 https://www.ebay.co.uk/itm/Genuine-Toyota-Avensis-Badge-New-sealed-7544505060-/293579700158 £10 https://www.ebay.co.uk/itm/Genuine-New-TOYOTA-BACK-DOOR-BADGE-Rear-Boot-Emblem-For-Avensis-T22-1997-2003/280839716611?hash=item416359ff03:g:KrMAAOSwPCVX66WT £10.50 is a sedan one https://www.ebay.co.uk/itm/Toyota-emblem-badge-75431-05030/193630029568?hash=item2d153fc700:g:qokAAOSwOBJfPQNy Quote Link to post Share on other sites
IgReilly 1 Posted January 21 Author Share Posted January 21 Logo. It's just a lattice, hollowed out behind to take glue. There is no part wide enough let alone flat enough totake tape. Just saw some £40 and £44 on Amazon. Quote Link to post Share on other sites
flash22 655 Posted January 21 Share Posted January 21 Can you measure the Badge please they just use a thick foam tape and its cut to shape Quote Link to post Share on other sites
IgReilly 1 Posted February 15 Author Share Posted February 15 On 1/21/2021 at 6:11 PM, flash22 said: Most badges use 3M VHB foam tape, is it the Avensis, Toyota badge ? or the logo ? Clean the badge and area with IPA (isopropyl alcohol) as it leaves no residue £8 https://www.ebay.co.uk/itm/Genuine-Toyota-Avensis-Badge-New-sealed-7544505060-/293579700158 £10 https://www.ebay.co.uk/itm/Genuine-New-TOYOTA-BACK-DOOR-BADGE-Rear-Boot-Emblem-For-Avensis-T22-1997-2003/280839716611?hash=item416359ff03:g:KrMAAOSwPCVX66WT £10.50 is a sedan one https://www.ebay.co.uk/itm/Toyota-emblem-badge-75431-05030/193630029568?hash=item2d153fc700:g:qokAAOSwOBJfPQNy? Sedan version looks right but am not on eBay. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.