Jump to content
Do Not Sell My Personal Information


Connecting factory camera to android radio - 2012 yaris mk3


Mike_mt
 Share

Recommended Posts

Hi, i have recently upgraded the original toyota touch radio to an aftermarket android radio. I would like to be able to connect the factory reversing camera to the new radio. Anyone have any info on the pinouts or which wires i need to connect to please?

UK spec, 2012 yaris (mk3) t-spirit with touch radio (no nav)

thank you in advance 🙏🏻

Link to comment
Share on other sites


1 hour ago, flash22 said:

You will need a camera retention cable OR you can wire it yourself but beware the factory camera runs at 6v (5.5-7.0v)

 

iirc the touch uses the 16 pin connector for the camera

https://connects2.com/Product/ProductItem/CAM-TY1-RT

 

 

Thanks 🙂

It looks like the black 16 pin plug which is not connected to the android radio. However that site shows a different 24pin connector for the 2012 Yaris which is weird. 

Link to comment
Share on other sites

This is the plug which looks like it corresponds to the one linked

C7B7354D-4799-445C-A83E-A51F72C6AEC9.jpeg

E16316A2-F209-402B-BC1F-460ABDB82FD2.jpeg

Link to comment
Share on other sites

If you read the documents the 24 and 28 pin are for later cars (yaris 2014 on aka touch2)

the early Auris also uses the 16 pin for the camera (touch)

 

 

 

  • Thanks 1
Link to comment
Share on other sites


17 minutes ago, flash22 said:

If you read the documents the 24 and 28 pin are for later cars (yaris 2014 on aka touch2)

the early Auris also uses the 16 pin for the camera (touch)

 

 

 

Thank you very much mate. 🙏🏻

Link to comment
Share on other sites

As viewed from the socket on the rear of the radio, or wire side of the plug - pin 6 is handbrake

1507548816_touch16pin.jpg.1460b94c66c29cad2ba89d5992a7f066.jpg

1865519660_touch16pincam.thumb.jpg.7baf8966378f9427ebe52b61a1fd6f85.jpg

Link to comment
Share on other sites

3 minutes ago, flash22 said:

As viewed from the socket on the rear of the radio, or wire side of the plug - pin 6 is handbrake

1507548816_touch16pin.jpg.1460b94c66c29cad2ba89d5992a7f066.jpg

1865519660_touch16pincam.thumb.jpg.7baf8966378f9427ebe52b61a1fd6f85.jpg

Do i have to wire pin 6 to anything? Or ground it?

Link to comment
Share on other sites

The hand brake wire comes from the hand brake, it tells the radio if its on or off

Link to comment
Share on other sites

Moved to the Yaris club.

Link to comment
Share on other sites

  • 2 weeks later...
On 5/30/2021 at 3:04 PM, flash22 said:

You will need a camera retention cable OR you can wire it yourself but beware the factory camera runs at 6v (5.5-7.0v)

 

iirc the touch uses the 16 pin connector for the camera

https://connects2.com/Product/ProductItem/CAM-TY1-RT

 

 

Hi, i got this cable and wired it in, however the radio does not switch to reverse camera. I connected the wires properly (video to reverse camera video input, red to camera 12v and black to ground).
 

The radio also has another wire to sense when reverse is engaged. Not sure which wire to connect to… but I tried to join to the camera 12v but it still does not turn on/switch to it. 

Link to comment
Share on other sites

The red typically gets wired to the reverse signal, have you also wired the reverse wire on the head unit ?

Pin 2 on the 28 pin should read 12V when in reverse (if wired)

2096446623_touch28pin.thumb.jpg.4f067388a3500eecab22c7c3202b2d41.jpg

Link to comment
Share on other sites

11 hours ago, flash22 said:

The red typically gets wired to the reverse signal, have you also wired the reverse wire on the head unit ?

Pin 2 on the 28 pin should read 12V when in reverse (if wired)

2096446623_touch28pin.thumb.jpg.4f067388a3500eecab22c7c3202b2d41.jpg

It does not seem to have anything in pin 2

 

AF7021CB-07D4-4500-BE65-1FEC72A1299D.jpeg

B7C9BADF-7C40-4D91-B0A5-7562F7AA7EC4.jpeg

85AB9EAE-93CE-4D55-8667-97B7B08F3C97.jpeg

AADFA3CA-43A5-4F9F-B0CD-9EED1C6994E3.jpeg

6987C8E0-917A-4DF6-B2EC-D2823C8BB946.jpeg

Link to comment
Share on other sites

ok your new radio has the 12V for the camera you need a 12v reverse signal input to pin 13

you will need to find the reverse wire in the body loom - I would need to look that up if it's LHD car

 

 

 

 

Link to comment
Share on other sites


1 minute ago, flash22 said:

ok your new radio has the 12V for the camera you need a 12v reverse signal input to pin 13

you will need to find the reverse wire in the body loom - I would need to look that up if it's LHD car

 

 

 

It is a RHD car. 2012 yaris t-spirit

Link to comment
Share on other sites

The reverse wire runs from the rear of the car on the drivers side (LHD) or passenger side (RHD) in the body loom up the firewall and into the fuse box, it does not go through the connectors behind the drivers (lhd) or Passenger (RHD) kick panel

the wire colour is red you can track it down using a wire piercing probe or tap it in the fuse box

122821192_gen3lhdengloomBA1.thumb.jpg.78dde85aa7fb2841b0dcda21aaa26ca2.jpg

Pin 19 on BA1 - Verify with a multimeter that you have 12V in reverse

640983504_gen3lhdengloomBA1socket.thumb.jpg.a73263483260904c081471d7cefbbf50.jpg

View of the plug is from the front (Left)

View of the socket as are looking at it (Right)

 

Link to comment
Share on other sites

  • 3 months later...

Hi

I have problem with my factory  camera reverse on android media radio when i put in reverse gear nothing happens i conect conectors all what i get and how must goes,can someone help me 

20211008_000024.jpg

20211008_000030.jpg

20211007_235951.jpg

20211007_235946.jpg

20210926_180431.jpg

20210906_153019.jpg

20210906_153454.jpg

Link to comment
Share on other sites

Do you have a reverse wire connected to the radio, the factory camera requires 5-7v or 6v nom.

Do you have the wiring diagram for this radio

Link to comment
Share on other sites

On 6/10/2021 at 1:33 PM, flash22 said:

I dont know what reverse wire is in  conector of car,when i conect Android radio,only not working parking cam when i put in reverse gear,diagram i dont have for this Android radio

I only have this from internet something 

 

 

20210906_153016.jpg

Screenshot_20210930-233603_AliExpress.jpg

-888493954422215267.jpg

-888555512340640722.jpg

Link to comment
Share on other sites

Pin 3 on the radio (brown wire) goes to pin 2 on the white 28 pin white connector, the 28 pin on the yaris does not have a reverse pin

you need to find a reverse signal wire (12V when in reverse) - on a LHD it's in the main body loom on the driver's side it runs up behind the kick panel then up into the engine bay

See my post above

Link to comment
Share on other sites

Aha so what i must do pin from conector of radio brown conect where?

Link to comment
Share on other sites

So in this car conector brown pin not going in there?i must conect somewhere else ? Or?

20211008_000024.jpg

Link to comment
Share on other sites

I was thinking maybe this wire is reverse, and brown wire goes here, but nothing happens when i conect here 

20211008_000024.jpg

Link to comment
Share on other sites

The brown wire comes from the radio to that socket but has no connection to the car - there is NO reverse wired

1402131193_yaris28pin2.thumb.jpg.5986ac4c5acb5b8a2cc6f5f68e3775ce.jpg

124729391_yaris28pin.thumb.jpg.d5dcd5de465bc895ec1e245a7d2b6d29.jpg

 

You need to wire the Brown to a Reverse signal

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership