Jump to content
Do Not Sell My Personal Information


  • Join Toyota Owners Club

    Join Europe's Largest Toyota Community! It's FREE!

     

2013 Toyota Yaris front screen wiper washer jet


ABL
 Share

Recommended Posts

Hi all, my wife owns a 2013 Toyota Yaris with the single front wiper blade which has the washer jet fixed to the blade. When the washer switch is operated the water emits from the jet but only shoots about 20cm from the jet in quite a dense flow. The jet is clear. I have disconnected the plastic tubes and blown them through with no improvement. If i squeeze the disconnected pipe end and operate the washer switch the water shoots a long way, as it used to when the washer system was operating correctly. Has something blown out of the jet allowing the water pressure at the jet to be low and thus the distance it shoots to be reduced? Will a new washer jet cure the problem or could it be caused by something else (?). Any help will be appreciated. Alan 

Link to comment
Share on other sites

Moved to the Yaris forum.

Link to comment
Share on other sites

The one way valve will be duff, get a new one from your dealer 

  • Thanks 1
Link to comment
Share on other sites

This is the way they are, it's more of a stream rather than a jet or a spray the wiper spreads the screenwash and wipes

The Bosch AeroTwin blade works very well

You're not the first and won't be the last to ask

  • Like 1
Link to comment
Share on other sites

  • 1 month later...
On 8/19/2022 at 10:16 AM, Parts-King said:

The one way valve will be duff, get a new one from your dealer 

Thanks for your advice.  I will check it out.

Link to comment
Share on other sites


On 8/19/2022 at 11:36 AM, flash22 said:

This is the way they are, it's more of a stream rather than a jet or a spray the wiper spreads the screenwash and wipes

The Bosch AeroTwin blade works very well

You're not the first and won't be the last to ask

The wiper jet shot a lot further across the windscreen some time ago, but now the water does not shoot far enough for the wiper blade to spread it across the screen to clean it, so there is a fault somewhere.  Thanks though for your reply.

Link to comment
Share on other sites

Link to comment
Share on other sites

  • 2 weeks later...
On 8/19/2022 at 10:16 AM, Parts-King said:

The one way valve will be duff, get a new one from your dealer 

Thankyou very much. I have purchased a new non-return valve and it looks as though it has fixed the problem.

  • Like 2
Link to comment
Share on other sites

On 9/23/2022 at 11:39 AM, flash22 said:

Thankyou very much for the link. I have purchased a new one and fitted it and it looks like it has solved the problem Cheers

  • Like 1
Link to comment
Share on other sites

Latest Deals

Toyota Official Store for genuine Toyota parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via eBay links

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...




Forums


News


Membership