Jump to content
Do Not Sell My Personal Information


Fitting El Glow Dials...


Jimlad
 Share

Recommended Posts

Just read through the instructions and it looks pretty straight forward.

Only thing I'm unsure about is where to get a 12v feed from. It says you must find a 12v supply which comes on when you turn the lights on.

Anyone got any ideas??

Link to comment
Share on other sites


  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

  • Jimlad

    27

  • JappyBeast

    14

  • Roytoner

    11

  • ricomr2

    11

Top Posters In This Topic

Jim you can run it from your cig lighter light. But make sure you put a inline fuse on other wise you will end up like me needing anew inverter :crybaby:

Link to comment
Share on other sites


erm...... dunno.

The power etc from the start button comes from the ignition side of the car as opposed to where the lighter is.... I think

just checked... all the wired for the starter come from the ignition harness.

Link to comment
Share on other sites

Come on matey, it ain't that hard to find a live feed that comes on when you turn your lights on init. Just tap into the feed from the dash/gauge power circuit init. Find the live wire that comes live when you turn the lights on. Theres only one!!

Link to comment
Share on other sites

off to have some fun...

all together now... "BOOM" .... lol.

hope not anyway.

Remember what I said on the phone :P

If it doe's I SAID NOTHING :thumbsup:

Link to comment
Share on other sites


nearly there !!

Cheers for the help roytoner.

Got it wired in... tested the dials, they work fine.

The inverter makes loud bluddy noises though!!! ... different pitched buzzing depending on what colour etc.

Now I just have to secure the dials in place ( glue! ), then put the car back together before it gets dark.

Link to comment
Share on other sites

lol

All sorted now and they look amazing when on!!

Quite impressed with me handy work. Drove about for 40mins or so... no smell of glue... lol

Link to comment
Share on other sites

Glue :help:

lol....

having the lights in or out didn't seem to make any difference mate. Probably would though if you removed the original dials first. I just stuck these over the originals.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership