Jump to content
Do Not Sell My Personal Information


Power Window And Lock Failure


HKIN
 Share

Recommended Posts

My 1990 Camry's power windows and locks just stopped working after 325000k. For awhile before the drivers side controls would not work when the door was open but would work when it was closed. Now it does not work at all as well as all the other controls on all doors. Any ideas.

Thanks for your help.

Link to comment
Share on other sites


sounds like the wiring loom through the a pillar and into the door has been damaged by years of opening and closing the door, take the door panel off an disconnect the wires then run the wires back into a straight line and put a tester on each of the pins and see if any of them are damaged.

replace the wires as necessary.

Link to comment
Share on other sites

  • 4 weeks later...

Also check for good ground connections. Sometimes the connections can become rusty or corroded.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership