Jump to content
Do Not Sell My Personal Information


Aquamist Kit Not Working


Kom_2rev2
 Share

Recommended Posts

hi peeps

i have an aquamist water/meth injection kit that the car came with, but i dont thik its working.... :rolleyes:

what are the possible reasons for this?

and how are they usualy set up to work on the 2 turbo's, is it on full throttle or constant? how can i tell?

thanks

komi

Link to comment
Share on other sites


It depends on which system you have. The basic system (the one I have) is controlled by a pressure sensor. On mine when the boost gets to 6psi the sensor triggers the relay, which in turn sends power to the pump. The pump takes water/methanol from the reservoir and sends it down the tube to the nozzle. If it's not working it could be any one of these things - could be a blocked jet/filter/tube, no power to the switch/relay/pump - almost any combination.

The more expensive systems can be triggered from standalone ECUs or Aquamist's own programmable unit. Take a look at the Aquamist forums and their website for lots more info.

Link to comment
Share on other sites

Are these rellay any good

I know people go on about them, but do they really work ?

(They help prevent det dont they ?)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership