Sand/bead Blasters/cleaners

[Monster-Mat]

i am after finding a good bead blaster to blast all the paint of the inside of the drift car so i can weld in the 10 point cage.

anyone know a decent firm, there must be some peeps on here in the metal/fabrication business

[Gnome]

I know one very good one, but they're all the way down here I'm afraid.

Do rally cars and the likes too - entrusted them with cleaning, blasting and powdercoating my bike fram earlier in the year.

£100 for the lot, which is cheap!

[dawesy]

mat , maybe a daft question, but why not dress the paint off with a zip wheel or similar? i have just fully seam welded the rolla using tis method and it worked a treat

[Monster-Mat]

dawsey mate, id do that, but......

a 10 point weld in cage is going in, fully triangulated, so it needs to go to the towers, and through the bulkheads, i will be welding up the holes in the chassis etc etc, so its easier if everything is back to bare metal

gnome, you got there details, Banbury aint that far

[Gnome]

Hi again matey.

Details are:

Banbury Powder Coating Ltd - 01295 278233

Banbury Powder Coating

Unit 6, Station Approach, Banbury, Oxon

HTH

[Monster-Mat]

cheers mucho