Alloy Advice

[kennynx]

Hey guys having a little difficulty deceiding if these wheels will fit my car.

im looking at put scooby wrx rims in my gen 6 celica but im not 100 % they will fit.

the celica is

pcd 5 x 100

offset 35 - 45

bore 54.1

the scooby is

pcd 5 x 100

offset 42 - 50

bore 56.1

what actually is the bore?

Thanks for your help

Kenny

[Bibbs]

Bore is the size of the "hole" in the middle .. there is a lip on the hub on the car that this hold slides onto to centre the wheel.

you can buy plastic rings to fill the gap. "spigot rings"

Look :

http://toyotaownersclub.com/forums/index.p...ndpost&p=262382

[kennynx]

Didnt really understand much of the story inside,

so along as i get wheels with a pcd of 5 x 100 and a offset less the 45 and greater than 35 the wheels should fit.

and i need to get custom rings made up to fit the bore.

Thanks

Kenny

[cfc1]

Might not need to go costom.. go to an alloy wheel seller and ask if the have centralising rings for.. make of wheel to make of car.. in your case.. wrx rims yo celica.. if they exist, they can order them in, only cost a couple of quid each.

Centralising rings....