Sign in to follow this  
carl:-)

Paseo Engine

Recommended Posts

hi im new to this foroum, and it looks a good source of info.

my question is does any one know if a 1989 corolla gti 4age engine will fit in a paseo. do the shafts etc fit? ive got the chance of both quite cheap and am thinking about making a quite quick track day car.

many thanks in advance

carl

Share this post


Link to post
Share on other sites
 

hi im new to this foroum, and it looks a good source of info.

my question is does any one know if a 1989 corolla gti 4age engine will fit in a paseo. do the shafts etc fit? ive got the chance of both quite cheap and am thinking about making a quite quick track day car.

many thanks in advance

carl

Unfortunatly mate i don't think this is as easy as it seams

From memory the mounts are different & the loom doesn't match up..

Its a good swap if you can afford it though. There are a few high powered 'seo's in the US running 4age based cars.

J

Share this post


Link to post
Share on other sites

J's right. use the search button though. you'll probably find some info. I know that two people have done that swap.

Share this post


Link to post
Share on other sites

did a search and didnt find much. its the 16v lump id be using as ive got both cars very cheap.

apparently the mounts are different and the shafts are different? not bothered about wiring thtll be no problem.

so if anyones got any pics or info itd be greatly appriciated

Share this post


Link to post
Share on other sites

too bad paseo pimp isn't around anymore. that would've given you all the info you need to know. i doubt any of the 4age members are on here, but James is right, the loom, and mounts are different. you shouldn't have to modify the subframe for the 4a as you would for the 3s. I've not heard about the driveshafts though.

Share this post


Link to post
Share on other sites

These things are always more complicated than they seem. Engine mounts will have to be made (carefully designed otherwise the engine could rip itself out). Driveshafts may need to be made, wiring could be a b*tch.

Share this post


Link to post
Share on other sites

Hi im new to the forum but i've been a paseo owner for a few years now and i love the car but about 2 months ago my engine went :( . I was wondering if anyone knew where i can get my Oil stained hands on a workshop manual for a 1996 1.5 ST Paseo from?

Thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this