Jump to content
Do Not Sell My Personal Information


Some Black Trim Needed...


Guest
 Share

Recommended Posts

Hi there,

What I need is some black trim for my MR2 MkII rev1.

If you are facing the drivers door ( right hand drive ), it's the bit to the left of the front indicator closest to the wheel arch. ( hope that makes sense )

The one on my motor is very scruffy !

Anyone able to help me out ??

cheers !!

Link to comment
Share on other sites


do you mean the trim that runs along the middle of the car with twin cam 16v turbo (on turbo) models printed towards the back? Not sure since I haven't seen a black one?? Could you draw it?

Link to comment
Share on other sites

I have seen it.. its the black trim on the font o/s wing that runs along where the indicators go.

James take a picture.

Link to comment
Share on other sites

trim.JPG

here it is.. you can see it just next to the indicator...

sorry for the sh*te pic, but it's foggy as hell outside and pitch black.

Anyone able to help ( it's only a small bit )

(Andy, I'll post better pics tomorrow of the whole car)

Link to comment
Share on other sites


I'm also after a some new Tbar bar glass panels. More the right hand one than the left... but only if in excellent condition as the rim of my right hand one is a little untidy. (nothing really, just prob being fussy)

let me know if anyone can help ??

(will post pics of mine tomorrow if required).

Gonna get my car looking sh*t hot, some bits need tidied up here and there... nothing major though.... another question while I'm writing...

Anyone know how to paint the calipers ? Does it need special paint etc?

Andy, when you getting your window fixed mate?

Link to comment
Share on other sites

James dont bother sending the pics tomorrow as I'm coming up to Scotland.. I'll see it in the flesh anyway... you can send me them later.

I have had an email saying my window mech is ready and waitint and only at £25 !!.. so I'm gonna get it fitted when I get back to Derby.

James try Fensport.. they sell T-Bar glass but not sure if they have any in stock and you have to make sure the trim is the same colour!

For the calipers.. I would say its a very fiddly job.. you can get brake paint from Halfords but any heat resistant paint will do.. I wouldnt bother personally unless they look well scabby.

Link to comment
Share on other sites

black plastic fi your lucky Toyota Celica Breakers, not that Ive mentioned them 100 times before on the forum, if not £85 from toyota....

caliper paint - hammerite smooth, cheap as chips and looks the plums with calliper stickers from the forum

Link to comment
Share on other sites

not that Ive mentioned them 100 times before on the forum

No you haven't, it's a 101 times :D

Link to comment
Share on other sites

black plastic fi your lucky Toyota Celica Breakers, not that Ive mentioned them 100 times before on the forum, if not £85 from toyota....

caliper paint - hammerite smooth, cheap as chips and looks the plums with calliper stickers from the forum

£85 just for that tiny wee bit ?

Link to comment
Share on other sites

black plastic fi your lucky Toyota Celica Breakers, not that Ive mentioned them 100 times before on the forum, if not £85 from toyota....

caliper paint - hammerite smooth, cheap as chips and looks the plums with calliper stickers from the forum

£85 just for that tiny wee bit ?

Get your self done up cat burgler style and head over to Calder Motor Company - FREE

Link to comment
Share on other sites

black plastic fi your lucky Toyota Celica Breakers, not that Ive mentioned them 100 times before on the forum, if not £85 from toyota....

caliper paint - hammerite smooth, cheap as chips and looks the plums with calliper stickers from the forum

£85 just for that tiny wee bit ?

Get your self done up cat burgler style and head over to Calder Motor Company - FREE

lol.....

beware fellow MR2 owners.... if all of a sudden you wake up one morning to find you've "magically :hokus-pokus: " lost some trim from your car...... erm, it wasn't me. :ph34r:

seriously tho.. if you can help, gimme a shout. Or I'll have to visit Mr T :( ££££

Link to comment
Share on other sites

black plastic fi your lucky Toyota Celica Breakers, not that Ive mentioned them 100 times before on the forum, if not £85 from toyota....

caliper paint - hammerite smooth, cheap as chips and looks the plums with calliper stickers from the forum

£85 just for that tiny wee bit ?

Get your self done up cat burgler style and head over to Calder Motor Company - FREE

where's calder motor company about mate..... ?.. :ph34r:

Link to comment
Share on other sites


SORRY TO DISAGREE WITH U ALL, BUT YOU'RE ALL WRONG! :P

just bought a new jap indicator from MR T (same as one needed here) and the plastic trim is attached to the indicator (all same unit). AND IT ONLY COST £16 and a few pence - £19 or thereabouts with VAT.

only 2 bolts to change the unit as well. STRESS THE COLOUR TRIM NEEDED WHEN BUYING THE INDICATOR - THERE ARE ABOUT 8 TO CHOOSE FROM.

if there is any variance in prices with different MR T'S, mine is MONTY'S OF SHEFFIELD.

pm me if u need phone numbers, more info etc. :thumbsup:

Link to comment
Share on other sites

where's calder motor company about mate..... ?.. :ph34r:

Calder Motor Company http://www.caldermotor.co.uk/ specialise in Jap imports.

They are just along the road from you, East Calder - Camps Industrial Estate next to the Bunker.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...




Forums


News


Membership