Jump to content
Do Not Sell My Personal Information


New Headunit Soon...


matt5cott
 Share

Recommended Posts

Ok I have a standard double din toyota HU in at the moment...

I got a cubby box sent over that sits below a single din HU, so that should work out fine.

However, anyone know if I need a wiring conversion kit? if so what one?

Its a 1998 model, not sure if it differs from earlier models or not :unsure:

Link to comment
Share on other sites



To replace the existing headunit in an MR2 (assuming it's not got the 'active speaker system') then you need a wiring loom, the PC2-17-4, available from Halfords for around £11.50.

I also replaced my Toyota blanking plate with a DIN Pocket from Halfords for £29.95, although can be found on the web for a bit cheaper, it's the FP-11-01.

http://www.incardiscount.co.uk/acatalog/FA_TOYOTA.html

Link to comment
Share on other sites

I do have the active speaker system...

I bout the £11.50 part to find it was the wrong one... so I had to order the one for the active speaker setup. It cost me £45 !!

what does the FP-11-00 Facia Adaptor do ? Does it basically cover one slot up so you don't have a great hole under your single din unit?

Link to comment
Share on other sites

To replace the existing headunit in an MR2 (assuming it's not got the 'active speaker system') then you need a wiring loom, the PC2-17-4, available from Halfords for around £11.50.

I take that the mentioned bit of kit works ok to convert jap models? :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share





×
×
  • Create New...




Forums


News


Membership