Home-made Induction Kit For My 'seo

[monkfish]

Hey folks, I was thinking bout making an induction kit for my paseo, and I was wondering if anyone else has tried this? Am I better off saving up and buying one?

[mythotical]

simple to make one if you have the works. find some #60 3" aluminum tube about 4' should do the trick then all you need is a breather for the pcc on the valve cover and a 16mm hole for the air temp sensor to fit and leave the small vacume hose off (the one that goes after the filter on top of the airbox) Manipulate the tube so it ends up going under the Battery, make a hole for it to go in to the fender in front of the wheel well. one precaution is to be sure to include a bypass valve near the throttlebody side of the rig so you do not suck up any water in the rainy season. If you do not have the works for this, look around on eBay for a 90-94 corola short intake and a 91-95 honda civic intake and mate the two, with the short one on the throttlebody and use the bypass valve to connect the two. please note that you will need to splice on some wire to the temp sensor so it will reach the hole on the short intake. Good luck, have fun and let me know if all goes well. or if you need any more help.

[monkfish]

Thanks very much, man! I'll get to work and let you know how it goes!!